1. The gas generator of the car airbag is nitrogen, and nitrogen will inflate the airbag within 0.1 seconds. There are substances such as sodium azide (NaN3) or ammonium nitrate (NH4NO3) in car airbags. When a car is hit violently at high speed, these substances will decompose quickly, producing a large amount of gas and filling the airbag.
2. The airbag gas generator is a device located in the airbag.Airbags are equipped with gas generators of different specifications. In the event of a vehicle collision, the gas generator inflates the airbag and unfolds it to protect the safety of passengers.
3. The airbag gas generator refers to a device that expands the airbag to protect the occupan before the occupan has a second collision in the event of a collision. The airbag, as an auxiliary device for the occupant restraint device in the seat, is called the Airbag Gas Generator System (SupplementalRestraintSystem, SRS).
4. The automobile airbag system is composed of collision sensor, control module (ECU), gas generator and airbag, etc. Airbag sensor: generally also known as collision sensor. According to different uses, collision sensors are divided into trigger collision sensors and protective collision sensors.
5. The working principle of the car airbag generator. The driver's airbag is stored in the steering wheel gasket. Therefore, when you see the words SRS or Airbag marked on the steering wheel, you can know that the car is equipped with airbags.
6. At present, gas generators mainly include compressed gas, fireworks and mixed gas. Airbag: It is generally made of polyamide fabric with good crack resistance, which is a semi-hard polymer material that can withstand greater pressure. After vulcanization, it can reduce the impact of airbag expansion.
Generally, this should be the left side airbag plug Caused by poor contact.It is recommended that you unplug the plug and plug it in, and use the decoder to clear the fault code. If it really doesn't work, you need to check the fault of the line.
The reason for the broken circuit or increased resistance of the Accord car airbag gas generator is: the situation caused by poor contact of the airbag plug.
If the generator is broken, then the pin of the generator is broken! If the whole circuit is broken or the resistance increases a lot, it is possible that there is a problem with the connector or the clock spring.
In this case, there are three possibilities: first, the airbag control unit fails, and it is possible to set any fault code. However, if the gas control unit is not submerged or disassembled, the chance of damage is very small.
If there is a problem with the main airbag or oil wire, it is recommended to find a professional to help you overhaul it.The car on Hongmei South Road in Minhang with Long 13-11 can be done. The places with AIR BAG on the car are all airbags.
There is a problem with one of the plugs of the main airbag or oil wire. The airbag computer board is generally in front of the gear lever or below the gear lever. The place with the AIR BAG in the car is the airbag.
1. Also, remember not to drive during drinking, and at the same time, you should correctly handle drunk driving, especially when the alcohol content is high or drunk or drunk. Don't drive the vehicle.
2. With the development of the automobile industry, airbags have almost become the standard for cars of various automobile manufacturers in recent years.It is equipped, but for this life-threatening widget, car owners seem to pay less attention to it.
3. Then the sitting posture. Generally speaking, drivers should not lean forward when driving. The sitting posture should be close to the seat, and the back seat should be adjusted to be able to control the car comfortably, so that there will be enough space for the airbag to fully play its protective role in the event of an accident.
4. Airbags are personal protection and safety technical measures. The airbag system is a passive safety protection system. When used with seat belts, it can provide effective collision protection for passengers. When a car collides, the car airbag can reduce the head injury rate by 25% and the facial injury rate by about 80%.
5. First of all, we should not knock or hit the part where the airbag is located at any time.
There are three types of airbag gas generators, which are divided into compressed gas type, pyrotic type and mixed type. They are made of polyphthalicamide fabric with good crack resistance. They are semi-hard polymer materials and can withstand great pressure.An airbag refers to a device that expands the airbag to protect the occupant in the event of a collision before the occupant has a second collision.
"Help" gas generator Some gas storage generators are combined with one or more igniters equipped with small gas pylerytors. The device heats the gas delivered to the gas generator and relies on the heating to increase the pressure of the gas in the airbag.
The automotive airbag system consists of a collision sensor, a control module (ECU), a gas generator and an airbag: 1. Airbag sensor: usually also called collision sensor. According to different uses, collision sensors are divided into trigger collision sensors and protective collision sensors.
At present, there are three main types of gas generators: compressed gas, fireworks and hybrid. Airbag: It is generally made of polyamide fabric with good anti-cracking performance. It is a semi-hard polymer material that can withstand greater pressure;After vulcanization, it can reduce the impact force when the airbag expands.
The safety performance of cars is for different protection purposes. There are many types, generally including side airbags, head airbags and knee airbags. There are very big differences between these three types.
Nitrogen. The gas generator of the car airbag is nitrogen, which will inflate the airbag in 0.1 seconds. An airbag is an elastic capsule, a medium filled with compressed air or water in a flexible rubber capsule.
shipment records analysis-APP, download it now, new users will receive a novice gift pack.
1. The gas generator of the car airbag is nitrogen, and nitrogen will inflate the airbag within 0.1 seconds. There are substances such as sodium azide (NaN3) or ammonium nitrate (NH4NO3) in car airbags. When a car is hit violently at high speed, these substances will decompose quickly, producing a large amount of gas and filling the airbag.
2. The airbag gas generator is a device located in the airbag.Airbags are equipped with gas generators of different specifications. In the event of a vehicle collision, the gas generator inflates the airbag and unfolds it to protect the safety of passengers.
3. The airbag gas generator refers to a device that expands the airbag to protect the occupan before the occupan has a second collision in the event of a collision. The airbag, as an auxiliary device for the occupant restraint device in the seat, is called the Airbag Gas Generator System (SupplementalRestraintSystem, SRS).
4. The automobile airbag system is composed of collision sensor, control module (ECU), gas generator and airbag, etc. Airbag sensor: generally also known as collision sensor. According to different uses, collision sensors are divided into trigger collision sensors and protective collision sensors.
5. The working principle of the car airbag generator. The driver's airbag is stored in the steering wheel gasket. Therefore, when you see the words SRS or Airbag marked on the steering wheel, you can know that the car is equipped with airbags.
6. At present, gas generators mainly include compressed gas, fireworks and mixed gas. Airbag: It is generally made of polyamide fabric with good crack resistance, which is a semi-hard polymer material that can withstand greater pressure. After vulcanization, it can reduce the impact of airbag expansion.
Generally, this should be the left side airbag plug Caused by poor contact.It is recommended that you unplug the plug and plug it in, and use the decoder to clear the fault code. If it really doesn't work, you need to check the fault of the line.
The reason for the broken circuit or increased resistance of the Accord car airbag gas generator is: the situation caused by poor contact of the airbag plug.
If the generator is broken, then the pin of the generator is broken! If the whole circuit is broken or the resistance increases a lot, it is possible that there is a problem with the connector or the clock spring.
In this case, there are three possibilities: first, the airbag control unit fails, and it is possible to set any fault code. However, if the gas control unit is not submerged or disassembled, the chance of damage is very small.
If there is a problem with the main airbag or oil wire, it is recommended to find a professional to help you overhaul it.The car on Hongmei South Road in Minhang with Long 13-11 can be done. The places with AIR BAG on the car are all airbags.
There is a problem with one of the plugs of the main airbag or oil wire. The airbag computer board is generally in front of the gear lever or below the gear lever. The place with the AIR BAG in the car is the airbag.
1. Also, remember not to drive during drinking, and at the same time, you should correctly handle drunk driving, especially when the alcohol content is high or drunk or drunk. Don't drive the vehicle.
2. With the development of the automobile industry, airbags have almost become the standard for cars of various automobile manufacturers in recent years.It is equipped, but for this life-threatening widget, car owners seem to pay less attention to it.
3. Then the sitting posture. Generally speaking, drivers should not lean forward when driving. The sitting posture should be close to the seat, and the back seat should be adjusted to be able to control the car comfortably, so that there will be enough space for the airbag to fully play its protective role in the event of an accident.
4. Airbags are personal protection and safety technical measures. The airbag system is a passive safety protection system. When used with seat belts, it can provide effective collision protection for passengers. When a car collides, the car airbag can reduce the head injury rate by 25% and the facial injury rate by about 80%.
5. First of all, we should not knock or hit the part where the airbag is located at any time.
There are three types of airbag gas generators, which are divided into compressed gas type, pyrotic type and mixed type. They are made of polyphthalicamide fabric with good crack resistance. They are semi-hard polymer materials and can withstand great pressure.An airbag refers to a device that expands the airbag to protect the occupant in the event of a collision before the occupant has a second collision.
"Help" gas generator Some gas storage generators are combined with one or more igniters equipped with small gas pylerytors. The device heats the gas delivered to the gas generator and relies on the heating to increase the pressure of the gas in the airbag.
The automotive airbag system consists of a collision sensor, a control module (ECU), a gas generator and an airbag: 1. Airbag sensor: usually also called collision sensor. According to different uses, collision sensors are divided into trigger collision sensors and protective collision sensors.
At present, there are three main types of gas generators: compressed gas, fireworks and hybrid. Airbag: It is generally made of polyamide fabric with good anti-cracking performance. It is a semi-hard polymer material that can withstand greater pressure;After vulcanization, it can reduce the impact force when the airbag expands.
The safety performance of cars is for different protection purposes. There are many types, generally including side airbags, head airbags and knee airbags. There are very big differences between these three types.
Nitrogen. The gas generator of the car airbag is nitrogen, which will inflate the airbag in 0.1 seconds. An airbag is an elastic capsule, a medium filled with compressed air or water in a flexible rubber capsule.
How to monitor competitor supply chains
author: 2024-12-23 21:43HS code-based freight consolidation
author: 2024-12-23 21:43Data-driven trade invoice verification
author: 2024-12-23 21:30How to reduce import export costs
author: 2024-12-23 22:34Global trade metadata enrichment
author: 2024-12-23 22:31High-precision instruments HS code mapping
author: 2024-12-23 22:10Metal commodities HS code directory
author: 2024-12-23 21:19Advanced trade data analytics techniques
author: 2024-12-23 21:03381.25MB
Check766.65MB
Check272.43MB
Check473.35MB
Check899.39MB
Check526.73MB
Check874.48MB
Check817.79MB
Check525.69MB
Check568.88MB
Check858.78MB
Check693.21MB
Check891.32MB
Check929.23MB
Check658.74MB
Check572.87MB
Check924.25MB
Check627.64MB
Check152.45MB
Check466.82MB
Check974.89MB
Check277.14MB
Check242.74MB
Check641.44MB
Check321.46MB
Check785.55MB
Check319.38MB
Check678.64MB
Check396.32MB
Check968.81MB
Check393.28MB
Check494.21MB
Check712.14MB
Check734.26MB
Check285.29MB
Check533.64MB
CheckScan to install
shipment records analysis to discover more
Netizen comments More
2337 supply chain transparency
2024-12-23 22:21 recommend
2369 Fish and seafood HS code mapping
2024-12-23 21:28 recommend
2484 Supply contracts referencing HS codes
2024-12-23 21:12 recommend
540 Advanced trade route cost analysis
2024-12-23 21:01 recommend
691 Sustainable sourcing via HS code tracking
2024-12-23 20:28 recommend