There are the following normal reasons for the abnormal sound of the engine compartment after parking: the cooling sound of the ternary catalyst: the normal working temperature of the ternary catalyst The degree is 400~800 degrees. After the ignition is turned off, its work will slowly stop, the temperature will also drop, and the internal metal parts will undergo thermal expansion and cold contraction, and then make a strange sound.
It's normal that the engine will still ring when the car is turned off. In order to prevent the temperature from cooling down quickly after the engine stops, it is "holding the cylinder". Maybe some car owners are parking their cars.After entering the garage and turning off the engine, you will hear the sound of "popping" from the bottom of the car. In fact, the "culprit" is the ternary catalyst located at the rear of the vehicle chassis.
The reasons are as follows: the clicking sound at the bottom of the vehicle may come from a ternary catalyst. The working temperature of the catalyst is as high as 1000℃. After extinguishing the fire, the internal metal parts will undergo thermal expansion and contraction, accompanied by a clattling sound. The engine cooling system may also be working.
The engine compartment has been ringing when the car is turned off. The sound at the bottom of the vehicle may come from a ternary catalyst. The working temperature of the ternary catalyst is close to 1,000 degrees Celsius. After the ignition is turned off, the internal metal parts will undergo thermal expansion and cold contraction, accompanied by some rattling sounds. It is also possible that the engine cooling system is working.
1. The reason why the engine is turned off and still makes a sound is that the clicking sound at the bottom of the vehicle may come from a ternary catalyst. The working temperature of the ternary catalyst is close to 1000After the Celsius engine is turned off, the internal metal parts will heat expand and shrink, accompanied by some rattling sounds; it is also possible that the engine cooling system is working.
2. Uneven engine cooling: After the car runs for a period of time, the engine temperature is very high. After the car is turned off, the temperature of each component will drop in a certain proportion, which will inevitably cause the friction between the internal metal parts of the engine to produce abnormal noise due to cooling and contraction.
3. The reasons for the engine buzzing after the car is turned off are the loose screw of the ternary catalyst interface, the damage to the magnet valve of the carbon tank, the poor operation of the suction and pull motor of the starter, and the abnormal noise caused by uneven engine cooling. The screw of the ternary catalyst interface position is loose: hot expansion and cold contraction after turning off will cause the abnormal sound to be more obvious. Solution: Just tighten the screw.
4. The water temperature is too high.The cooling fan of the engine will automatically cool down and stop turning after the water temperature drops. If this phenomenon occurs frequently, check whether the engine cooling water is insufficient, or other reasons cause the engine temperature to be too high. Flying car. It's true that the engine can't be turned off, and the piston and crankshaft are still turning.
5. The reasons are as follows: the clicking sound at the bottom of the vehicle may come from a ternary catalyst. The working temperature of the catalyst is as high as 1000℃. After extinguishing the fire, the internal metal parts will undergo thermal expansion and contraction, accompanied by a clattling sound. The engine cooling system may also be working.
1. There are two reasons: the cooling fan of the engine is automatically lowered.Temperature When the engine temperature is too high, even if the car is turned off, the key is pulled away from the car, and its cooling system will still automatically start to cool the engine system. The reason for the beeping sound is the sound of the electronic fan running at high speed.
2. It's normal for the engine to sound when the car is turned off. In order to prevent the temperature from cooling down rapidly after the engine stops, it is "holding the cylinder". Some car owners may hear a "pop" sound from the bottom of the car after parking the car in the garage and turning off the engine. In fact, the "culprit" is the ternary catalyst located at the tail of the vehicle chassis.
3. Even if the car has stopped and turned off, the engine will still make a sound, which is also a very normal phenomenon. In order to prevent the temperature from falling rapidly, you need to "hold the cylinder" after parking.
1. The reasons are as follows: The clicking sound at the bottom of the vehicle may come from the ternary catalyst. The working temperature of the catalyst is as high as 1000℃. After extinguishing the fire, the internal metal parts will undergo thermal expansion and contraction, accompanied by a clattling sound. The engine cooling system may also be working.
2. It's normal for the engine to sound when the car is turned off. In order to prevent the temperature from cooling down rapidly after the engine stops, it is "holding the cylinder". Some car owners may hear a "pop" sound from the bottom of the car after parking the car in the garage and turning off the engine. In fact, the "culprit" is the ternary catalyst located at the tail of the vehicle chassis.
3. The reason why the engine is still noisy when the engine is turned off is that the clicking sound at the bottom of the vehicle may come from a ternary catalyst.The working temperature of the ternary catalyst is close to 1000 degrees Celsius. After the engine is turned off, the internal metal parts will undergo thermal expansion and cold contraction, accompanied by some rattling sounds; it is also possible that the engine cooling system is working.
4. The water temperature is too high. The cooling fan of the engine will automatically cool down and stop turning after the water temperature drops. If this phenomenon occurs frequently, check whether the engine cooling water is insufficient, or other reasons cause the engine temperature to be too high. Flying car. It's true that the engine can't be turned off, and the piston and crankshaft are still turning.
5. The water temperature is too high. The cooling fan of the engine will automatically cool down and stop turning after the water temperature drops. If this phenomenon occurs frequently, it is necessary to check whether the engine cooling water is insufficient or other reasons affect the engine temperature. Speeding.It's true that the engine can't be extinguished. The piston and crankshaft are still running.
1. Uneven engine cooling: After the car runs for a period of time, the engine temperature is very high. After the car is turned off, the temperature of each component will drop in a certain proportion, which will inevitably cause the friction between the internal metal parts of the engine to produce abnormal noise due to cooling and contraction.
2. The water temperature is too high. The cooling fan of the engine will automatically cool down and stop turning after the water temperature drops. If this phenomenon occurs frequently, check whether the engine cooling water is insufficient, or other reasons cause the engine temperature to be too high. Flying car. It's true that the engine can't be turned off, and the piston and crankshaft are still turning.
3. This is a very normal operation. Even if the car has stopped and turned off, the engine will still make a sound, which is also a normal phenomenon. In order to prevent the temperature from falling rapidly, you need to "hold the cylinder" after parking.
4. The car is turned off, but the engine is still noisy. This situation is usually caused by some reason that the engine has not stopped completely. The following are the possible reasons and solutions: the air-combustion ratio is too thick or too thin. If the proportion of air and fuel is incorrect, the engine will make an abnormal noise when running.
5. It's normal for the engine to sound when the car is turned off. In order to prevent the temperature from cooling down rapidly after the engine stops, it is "holding the cylinder". Maybe some car owners will hear the bottom of the car after parking the car in the garage and turning off the engine.There is a "pop" sound. In fact, the "culprit" is the ternary catalyst located at the rear of the vehicle chassis.
6. There are two reasons: automatic cooling of the engine cooling fan: when the engine temperature is too high, even if the car is turned off, the key will leave the car, and its cooling system will automatically start and cool the engine system. The reason for the whistling sound is the sound of the electronic fan running at high speed.
shipment data access-APP, download it now, new users will receive a novice gift pack.
There are the following normal reasons for the abnormal sound of the engine compartment after parking: the cooling sound of the ternary catalyst: the normal working temperature of the ternary catalyst The degree is 400~800 degrees. After the ignition is turned off, its work will slowly stop, the temperature will also drop, and the internal metal parts will undergo thermal expansion and cold contraction, and then make a strange sound.
It's normal that the engine will still ring when the car is turned off. In order to prevent the temperature from cooling down quickly after the engine stops, it is "holding the cylinder". Maybe some car owners are parking their cars.After entering the garage and turning off the engine, you will hear the sound of "popping" from the bottom of the car. In fact, the "culprit" is the ternary catalyst located at the rear of the vehicle chassis.
The reasons are as follows: the clicking sound at the bottom of the vehicle may come from a ternary catalyst. The working temperature of the catalyst is as high as 1000℃. After extinguishing the fire, the internal metal parts will undergo thermal expansion and contraction, accompanied by a clattling sound. The engine cooling system may also be working.
The engine compartment has been ringing when the car is turned off. The sound at the bottom of the vehicle may come from a ternary catalyst. The working temperature of the ternary catalyst is close to 1,000 degrees Celsius. After the ignition is turned off, the internal metal parts will undergo thermal expansion and cold contraction, accompanied by some rattling sounds. It is also possible that the engine cooling system is working.
1. The reason why the engine is turned off and still makes a sound is that the clicking sound at the bottom of the vehicle may come from a ternary catalyst. The working temperature of the ternary catalyst is close to 1000After the Celsius engine is turned off, the internal metal parts will heat expand and shrink, accompanied by some rattling sounds; it is also possible that the engine cooling system is working.
2. Uneven engine cooling: After the car runs for a period of time, the engine temperature is very high. After the car is turned off, the temperature of each component will drop in a certain proportion, which will inevitably cause the friction between the internal metal parts of the engine to produce abnormal noise due to cooling and contraction.
3. The reasons for the engine buzzing after the car is turned off are the loose screw of the ternary catalyst interface, the damage to the magnet valve of the carbon tank, the poor operation of the suction and pull motor of the starter, and the abnormal noise caused by uneven engine cooling. The screw of the ternary catalyst interface position is loose: hot expansion and cold contraction after turning off will cause the abnormal sound to be more obvious. Solution: Just tighten the screw.
4. The water temperature is too high.The cooling fan of the engine will automatically cool down and stop turning after the water temperature drops. If this phenomenon occurs frequently, check whether the engine cooling water is insufficient, or other reasons cause the engine temperature to be too high. Flying car. It's true that the engine can't be turned off, and the piston and crankshaft are still turning.
5. The reasons are as follows: the clicking sound at the bottom of the vehicle may come from a ternary catalyst. The working temperature of the catalyst is as high as 1000℃. After extinguishing the fire, the internal metal parts will undergo thermal expansion and contraction, accompanied by a clattling sound. The engine cooling system may also be working.
1. There are two reasons: the cooling fan of the engine is automatically lowered.Temperature When the engine temperature is too high, even if the car is turned off, the key is pulled away from the car, and its cooling system will still automatically start to cool the engine system. The reason for the beeping sound is the sound of the electronic fan running at high speed.
2. It's normal for the engine to sound when the car is turned off. In order to prevent the temperature from cooling down rapidly after the engine stops, it is "holding the cylinder". Some car owners may hear a "pop" sound from the bottom of the car after parking the car in the garage and turning off the engine. In fact, the "culprit" is the ternary catalyst located at the tail of the vehicle chassis.
3. Even if the car has stopped and turned off, the engine will still make a sound, which is also a very normal phenomenon. In order to prevent the temperature from falling rapidly, you need to "hold the cylinder" after parking.
1. The reasons are as follows: The clicking sound at the bottom of the vehicle may come from the ternary catalyst. The working temperature of the catalyst is as high as 1000℃. After extinguishing the fire, the internal metal parts will undergo thermal expansion and contraction, accompanied by a clattling sound. The engine cooling system may also be working.
2. It's normal for the engine to sound when the car is turned off. In order to prevent the temperature from cooling down rapidly after the engine stops, it is "holding the cylinder". Some car owners may hear a "pop" sound from the bottom of the car after parking the car in the garage and turning off the engine. In fact, the "culprit" is the ternary catalyst located at the tail of the vehicle chassis.
3. The reason why the engine is still noisy when the engine is turned off is that the clicking sound at the bottom of the vehicle may come from a ternary catalyst.The working temperature of the ternary catalyst is close to 1000 degrees Celsius. After the engine is turned off, the internal metal parts will undergo thermal expansion and cold contraction, accompanied by some rattling sounds; it is also possible that the engine cooling system is working.
4. The water temperature is too high. The cooling fan of the engine will automatically cool down and stop turning after the water temperature drops. If this phenomenon occurs frequently, check whether the engine cooling water is insufficient, or other reasons cause the engine temperature to be too high. Flying car. It's true that the engine can't be turned off, and the piston and crankshaft are still turning.
5. The water temperature is too high. The cooling fan of the engine will automatically cool down and stop turning after the water temperature drops. If this phenomenon occurs frequently, it is necessary to check whether the engine cooling water is insufficient or other reasons affect the engine temperature. Speeding.It's true that the engine can't be extinguished. The piston and crankshaft are still running.
1. Uneven engine cooling: After the car runs for a period of time, the engine temperature is very high. After the car is turned off, the temperature of each component will drop in a certain proportion, which will inevitably cause the friction between the internal metal parts of the engine to produce abnormal noise due to cooling and contraction.
2. The water temperature is too high. The cooling fan of the engine will automatically cool down and stop turning after the water temperature drops. If this phenomenon occurs frequently, check whether the engine cooling water is insufficient, or other reasons cause the engine temperature to be too high. Flying car. It's true that the engine can't be turned off, and the piston and crankshaft are still turning.
3. This is a very normal operation. Even if the car has stopped and turned off, the engine will still make a sound, which is also a normal phenomenon. In order to prevent the temperature from falling rapidly, you need to "hold the cylinder" after parking.
4. The car is turned off, but the engine is still noisy. This situation is usually caused by some reason that the engine has not stopped completely. The following are the possible reasons and solutions: the air-combustion ratio is too thick or too thin. If the proportion of air and fuel is incorrect, the engine will make an abnormal noise when running.
5. It's normal for the engine to sound when the car is turned off. In order to prevent the temperature from cooling down rapidly after the engine stops, it is "holding the cylinder". Maybe some car owners will hear the bottom of the car after parking the car in the garage and turning off the engine.There is a "pop" sound. In fact, the "culprit" is the ternary catalyst located at the rear of the vehicle chassis.
6. There are two reasons: automatic cooling of the engine cooling fan: when the engine temperature is too high, even if the car is turned off, the key will leave the car, and its cooling system will automatically start and cool the engine system. The reason for the whistling sound is the sound of the electronic fan running at high speed.
Trade data visualization dashboards
author: 2024-12-24 01:35HS code harmonization in NAFTA region
author: 2024-12-24 01:32Plant-based proteins HS code verification
author: 2024-12-24 00:35Country of import HS code variations
author: 2024-12-23 23:53Global trade certificate verification
author: 2024-12-24 01:36Biotech imports HS code classification
author: 2024-12-24 01:16Global HS code data enrichment services
author: 2024-12-24 00:41How to track competitor import export data
author: 2024-12-23 23:35
Global trade compliance scorecards
848.52MB
Check
supply chain intelligence
932.52MB
Check
Sourcing intelligence platforms
641.85MB
Check
Granular HS code detail for compliance officers
737.21MB
Check
Export compliance automation
587.83MB
Check
Leveraging global trade statistics
734.33MB
Check
customs data reports
455.31MB
Check
HS code trends in textiles and apparel
384.64MB
Check
Non-tariff barriers by HS code
483.99MB
Check
Canned foods HS code classification
686.73MB
Check
import export database
788.44MB
Check
Top trade data APIs for developers
455.47MB
Check
Trade intelligence for emerging markets
281.63MB
Check
Precision instruments HS code verification
183.83MB
Check
Cross-border HS code harmonization
244.61MB
Check
customs transaction analysis
767.34MB
Check
Latin America HS code classification
292.27MB
Check
How to adapt to shifting trade policies
137.95MB
Check
Wheat (HS code ) import data
268.64MB
Check
High-value machinery HS code classification
243.67MB
Check
How to improve vendor negotiations
247.23MB
Check
HS code filtering for restricted items
249.26MB
Check
How to find authorized economic operators
764.75MB
Check
Global trade claim management
926.67MB
Check
Global trade corridor analysis
668.45MB
Check
Global sourcing directories by HS code
836.12MB
Check
Jewelry trade HS code references
354.21MB
Check
HS code-driven freight route adjustments
328.17MB
Check
Real-time import quota alerts
743.89MB
Check
Dynamic trade data cleansing
765.41MB
Check
Global trade freight forwarder data
846.24MB
Check
HS code mapping for duty optimization
938.51MB
Check
How to align trade data with ERP systems
982.31MB
Check
HS code-driven CSR checks
353.41MB
Check
How to use data for HS code classification
493.59MB
Check
Processed meat HS code verification
719.57MB
Check
Scan to install
shipment data access to discover more
Netizen comments More
1967 HS code correlation with quality standards
2024-12-24 01:11 recommend
495 Global trade risk heatmaps
2024-12-24 00:33 recommend
457 Trade intelligence for emerging markets
2024-12-24 00:13 recommend
2925 Global HS code data enrichment services
2024-12-23 23:52 recommend
106 Global trade intelligence for investors
2024-12-23 23:45 recommend