1. In the process of overhauling the high-voltage circuit, the detection method is high-voltage testing. Through this overhaul technology, the cause of the failure can be determined.
2. Whether the car engine fails is still a little obvious. Analyze the engine failure from the abnormality of the exhaust color. The color of the exhaust gas after normal combustion of gasoline should be colorless, and when the engine fails, the color of the exhaust gas will change. First, the exhaust gas is black because the fuel is not fully burned.
3. Replace the air filter and fuel filter: If it is found that the fuel consumption has increased, it may be caused by the blockage of the air filter or fuel filter.At this time, these filters need to be replaced in time.
4. The above introduces the common faults of automobiles and the relevant content of maintenance knowledge. Let's take a look at the common faults of automobiles.
5. The current maintenance requirements for automobile engine failure are based on a sound maintenance theory. Compared with the technical level of automobile engine fault maintenance in Western developed countries, there is a large room for the development of engine fault maintenance technology in China's automobile industry, and research needs to be strengthened in terms of application.
6. Compared with gasoline engines, the advantages of diesel engines are that diesel is cheap and economical, and it does not have an ignition system, so there are fewer failures.
1. Engine maintenance: including engine disassembly, cleaning, inspection, maintenance and assembly and other technologies. Transmission maintenance: including transmission disassembly, cleaning, inspection, maintenance and assembly and other technologies. Electrical system maintenance: including fault diagnosis, maintenance and replacement of automotive electrical systems and other technologies.
2. In addition, automobile maintenance technology can also be based on the category of automobile engines.Type and use status, choose suitable technologies such as car engine cleaning, lubrication and engine maintenance to ensure the normal operation of the car engine.
3. The problem of burning engine oil in cars is familiar to the owner and the maintenance master, which is painful. There are also various reasons for burning engine oil. Today, the editor of Schmoqi Repair will explain the knowledge of engine maintenance - the cause of oil burning failure.
4. The engine starts cold car. After starting, the engine vibrates, and then tends to stabilize. The medium and low engines begin to shake. In this case, the spark plug and ignition failure, if it is not a spark plug failure, the ignition time may be too early. If the above fault occurs, it should be repaired at the repair shop in time.
5. Engine oil, that is, engine lubricating oil, can play the role of lubricating and reducing wear, auxiliary cooling, sealing and anti-leakage, anti-rust and anti-corrosion, shock absorption and cushioning of the engine.It is known as the "blood" of cars. Oil is composed of two parts: base oil and additives.
6. Learning engine maintenance technology is relatively easy to learn. The main thing is to learn the mechanical part first, and this part should be practiced more. The second is the disassembly and installation part. The electronic control part should listen to the teacher's explanation for corresponding detection and measurement.
Automotive engineering technology: This is a major that covers knowledge of automobile design, manufacturing and maintenance, including engine, chassis, electrical control system, etc. Automobile application and maintenance: This is a major that focuses on practical operation. Students will receive training on car troubleshooting, maintenance and testing.
The auto repair major includes many directions, including the reception direction of the automobile front desk, the direction of automobile decoration and beauty, the direction of automobile sheet metal spraying, the direction of automobile manufacturing technology, the direction of automobile inspection and maintenance, and the direction of automobile electrical appliances inspection and maintenance.
Professional classification: Auto repair enterprises will divide the types of work into automobile circuit, automobile sheet metal, automobile painting, automobile air conditioning, automobile machinery. The mainstream projects are automobile electromechanical, automobile sheet metal spraying, and automobile beauty. Relevant schools will also set up three majors in this way.
Abstract: Auto repair major is to train automobile maintenance professionals. There are many types of auto maintenance, and auto repair is also divided into several majors, including automotive circuits, automotive sheet metal, automotive painting, automotive air conditioning, automotive machinery, etc.
New energy vehiclesTechnical engineer New energy vehicle technology mainly studies the basic knowledge and skills of new energy vehicle composition structure, battery design, fault diagnosis, maintenance and maintenance, etc., and carries out the production and manufacturing, assembly and debugging, inspection and maintenance of new energy vehicles, etc.
Auto repair majors mainly include automobile service engineering, automobile sales and evaluation, automobile inspection and maintenance, etc.
If the battery is dead, make a rescue call or find a car to check, and then go to the service station to charge the battery. If the tire is flat, a specialized repair shop will repair or replace it. Significant increase in fuel consumption: After using the car for a period of time, many car owners will find that the fuel consumption has suddenly increased by more than 10%, which is puzzling.
It loses its original performance, and it will also cause oil bonding and oil spare deformation, which is easy to cause fire. The best practice is to choose suitable engine oil according to the lowest local winter temperature. Where conditions permit, it is best to park the vehicle in a garage with insulation facilities.
The basic faults and maintenance methods of the car are as follows: the battery is insufficient, and emergency power supply is needed to start the vehicle. The vehicle is difficult to start, and the spark plugs and fuel injectors need to be checked. The steering wheel suddenly becomes heavy during use, and it is necessary to check whether the vehicle's assistance system is damaged or lacks lubricating oil.
This method is to use the knowledge we have learned and various detection equipment to gradually find faults. This method is often used for some soft faults and difficult problems. Example: A Mitsubishi V6 sedan, increase the throttle speed up to 3000r/min.We first check the ignition system, replace the spark plug, and measure the high-voltage line to meet the standard value.
Trade data for resource allocation-APP, download it now, new users will receive a novice gift pack.
1. In the process of overhauling the high-voltage circuit, the detection method is high-voltage testing. Through this overhaul technology, the cause of the failure can be determined.
2. Whether the car engine fails is still a little obvious. Analyze the engine failure from the abnormality of the exhaust color. The color of the exhaust gas after normal combustion of gasoline should be colorless, and when the engine fails, the color of the exhaust gas will change. First, the exhaust gas is black because the fuel is not fully burned.
3. Replace the air filter and fuel filter: If it is found that the fuel consumption has increased, it may be caused by the blockage of the air filter or fuel filter.At this time, these filters need to be replaced in time.
4. The above introduces the common faults of automobiles and the relevant content of maintenance knowledge. Let's take a look at the common faults of automobiles.
5. The current maintenance requirements for automobile engine failure are based on a sound maintenance theory. Compared with the technical level of automobile engine fault maintenance in Western developed countries, there is a large room for the development of engine fault maintenance technology in China's automobile industry, and research needs to be strengthened in terms of application.
6. Compared with gasoline engines, the advantages of diesel engines are that diesel is cheap and economical, and it does not have an ignition system, so there are fewer failures.
1. Engine maintenance: including engine disassembly, cleaning, inspection, maintenance and assembly and other technologies. Transmission maintenance: including transmission disassembly, cleaning, inspection, maintenance and assembly and other technologies. Electrical system maintenance: including fault diagnosis, maintenance and replacement of automotive electrical systems and other technologies.
2. In addition, automobile maintenance technology can also be based on the category of automobile engines.Type and use status, choose suitable technologies such as car engine cleaning, lubrication and engine maintenance to ensure the normal operation of the car engine.
3. The problem of burning engine oil in cars is familiar to the owner and the maintenance master, which is painful. There are also various reasons for burning engine oil. Today, the editor of Schmoqi Repair will explain the knowledge of engine maintenance - the cause of oil burning failure.
4. The engine starts cold car. After starting, the engine vibrates, and then tends to stabilize. The medium and low engines begin to shake. In this case, the spark plug and ignition failure, if it is not a spark plug failure, the ignition time may be too early. If the above fault occurs, it should be repaired at the repair shop in time.
5. Engine oil, that is, engine lubricating oil, can play the role of lubricating and reducing wear, auxiliary cooling, sealing and anti-leakage, anti-rust and anti-corrosion, shock absorption and cushioning of the engine.It is known as the "blood" of cars. Oil is composed of two parts: base oil and additives.
6. Learning engine maintenance technology is relatively easy to learn. The main thing is to learn the mechanical part first, and this part should be practiced more. The second is the disassembly and installation part. The electronic control part should listen to the teacher's explanation for corresponding detection and measurement.
Automotive engineering technology: This is a major that covers knowledge of automobile design, manufacturing and maintenance, including engine, chassis, electrical control system, etc. Automobile application and maintenance: This is a major that focuses on practical operation. Students will receive training on car troubleshooting, maintenance and testing.
The auto repair major includes many directions, including the reception direction of the automobile front desk, the direction of automobile decoration and beauty, the direction of automobile sheet metal spraying, the direction of automobile manufacturing technology, the direction of automobile inspection and maintenance, and the direction of automobile electrical appliances inspection and maintenance.
Professional classification: Auto repair enterprises will divide the types of work into automobile circuit, automobile sheet metal, automobile painting, automobile air conditioning, automobile machinery. The mainstream projects are automobile electromechanical, automobile sheet metal spraying, and automobile beauty. Relevant schools will also set up three majors in this way.
Abstract: Auto repair major is to train automobile maintenance professionals. There are many types of auto maintenance, and auto repair is also divided into several majors, including automotive circuits, automotive sheet metal, automotive painting, automotive air conditioning, automotive machinery, etc.
New energy vehiclesTechnical engineer New energy vehicle technology mainly studies the basic knowledge and skills of new energy vehicle composition structure, battery design, fault diagnosis, maintenance and maintenance, etc., and carries out the production and manufacturing, assembly and debugging, inspection and maintenance of new energy vehicles, etc.
Auto repair majors mainly include automobile service engineering, automobile sales and evaluation, automobile inspection and maintenance, etc.
If the battery is dead, make a rescue call or find a car to check, and then go to the service station to charge the battery. If the tire is flat, a specialized repair shop will repair or replace it. Significant increase in fuel consumption: After using the car for a period of time, many car owners will find that the fuel consumption has suddenly increased by more than 10%, which is puzzling.
It loses its original performance, and it will also cause oil bonding and oil spare deformation, which is easy to cause fire. The best practice is to choose suitable engine oil according to the lowest local winter temperature. Where conditions permit, it is best to park the vehicle in a garage with insulation facilities.
The basic faults and maintenance methods of the car are as follows: the battery is insufficient, and emergency power supply is needed to start the vehicle. The vehicle is difficult to start, and the spark plugs and fuel injectors need to be checked. The steering wheel suddenly becomes heavy during use, and it is necessary to check whether the vehicle's assistance system is damaged or lacks lubricating oil.
This method is to use the knowledge we have learned and various detection equipment to gradually find faults. This method is often used for some soft faults and difficult problems. Example: A Mitsubishi V6 sedan, increase the throttle speed up to 3000r/min.We first check the ignition system, replace the spark plug, and measure the high-voltage line to meet the standard value.
Pharma R&D materials HS code verification
author: 2024-12-23 23:19Advanced trade route cost analysis
author: 2024-12-23 23:09HS code-based cost modeling for imports
author: 2024-12-23 21:45How to select the best trade data provider
author: 2024-12-23 21:21Real-time freight schedule optimization
author: 2024-12-23 23:18How to find reliable importers and exporters
author: 2024-12-23 22:42How to track competitor import export data
author: 2024-12-23 22:16Best Asia-Pacific trade analysis
author: 2024-12-23 21:00438.32MB
Check332.21MB
Check594.78MB
Check756.17MB
Check129.23MB
Check261.13MB
Check376.11MB
Check685.39MB
Check731.38MB
Check151.45MB
Check186.26MB
Check167.52MB
Check392.38MB
Check463.42MB
Check572.77MB
Check638.42MB
Check982.71MB
Check965.83MB
Check936.58MB
Check986.87MB
Check943.52MB
Check844.72MB
Check929.46MB
Check737.53MB
Check984.58MB
Check438.29MB
Check619.41MB
Check763.65MB
Check134.21MB
Check578.85MB
Check115.68MB
Check285.42MB
Check667.79MB
Check997.92MB
Check852.21MB
Check752.12MB
CheckScan to install
Trade data for resource allocation to discover more
Netizen comments More
2198 Mineral fuels HS code data analysis
2024-12-23 23:20 recommend
537 China HS code interpretation guide
2024-12-23 23:05 recommend
1435 Pet feed HS code verification
2024-12-23 22:22 recommend
95 HS code mapping tools for manufacturers
2024-12-23 20:52 recommend
1008 Data-driven multimodal transport decisions
2024-12-23 20:48 recommend