In terms of safety, ASX Jinxuan's safety is also very good. Its body can remain stable in extreme situations, and it is also equipped with a variety of safety configurations, such as ABS anti-lock system, ESP electronic stability system, vehicle anti-theft system, and other safety configurations, which can make you Feel more at ease while driving.
Strong power The powerful engine adopts advanced technology, and the engine is more powerful, with a maximum power of 126Kw and a maximum torque of 262Nm, which improves the acceleration performance of the car.In addition, the powerful engine adopts a new fuel system technology, which can effectively improve the acceleration performance of the car, so as to meet the needs of car driving.
In a word, in terms of off-road performance, the performance of Jinxuan ASX is relatively good. At this point, I believe that you have a comprehensive understanding of Mitsubishi's powerful ASX: the appearance design is good, the internal space is not bad, the power performance is good, the suspension tuning and four-wheel drive system are excellent, and the off-road performance is quite good.
Power: In terms of power, although it is not possible to step on the accelerator, it can immediately go far away. But I don't think it's new and dazzling. It feels quite strong to step on the accelerator and push the back, and it's also very easy to overtake. Although engine technology is not a high-ranking technology, it is very mature and can stand the test of time.
B11 has slightly better power. 4J11 is a new generation of products, but the power of the engine has decreased slightly, but the fuel consumption is lower.
The biggest difference between the J series and the 4B series is that the 4B series is a variable valve timing technology, and the 4J series is a variable valve lift technology. The technical route is energy-saving. The dynamics is slightly worse than that of the previous generation engine 4B11/4B12 engine, but the energy saving is significantly improved.
In addition, in terms of noise optimization, 4J11 is optimized for different engine speeds, so it will be relatively quiet during the whole driving process. Speak bluntly.One point, although there is no obvious improvement in the power of this engine, it is fuel-saving and quieter, which are also very important for home.
j11 engine is a 0-liter naturally aspirated engine. The maximum power of this engine is 122kw, the maximum torque is 201 Nm, the maximum power speed is 6,000 rpm, and the maximum torque speed is 4200 rpm. This engine is equipped with multi-point electric injection technology. , and the aluminum alloy cylinder head cylinder block is used.
The 20L 4B11 engine used for peak torque 175N·m4250rpm, the maximum power of the engine is 112kW6000rpm, the peak torque 197N·m4250rpm Mitsubishi Wing God has been released since 1973, and so far it has experienced 1 Generation 0, achieved brilliant results in the World Rally Championship.
The test drive model is a powertrain equipped with a set of 0L self-aspirated engine + CVT gearbox. The engine is no longer the original 4B11, but the same 4J11 as Outlander, which has better power and torque. In terms of gearbox, the manual transmission has been canceled and the S gear and L gear functions have been added.
J11 engine is not made in China. The 4J11 engine is produced by Mitsubishi of Japan and imported from the original factory. After the domestic production line is put into production, it will take a long time to assemble it gradually and fully localize it. The 4J11 engine is currently installed on the Outlander model. The 4J11 engine belongs to the 4K1 series, which is currently the most advanced in the entire Mitsubishi brand.
The two are mainly different in terms of auto parts, price and power. Spare parts Domestic Outlander: Domestic accessories are mainly selected. Imported Outlander: Imported original accessories are used. Price Domestic Outlander: The price is lower than that of imported ones.
4j12 for the first batches of newly launched modelsThe motive is imported. After the domestic production line is assembled and put into use, this engine will be domestically produced. When a joint venture brand car was first launched, many spare parts used in the car were imported, and some car engines were originally imported.
The two are mainly different in the price of auto parts and power. First, the domestic Outlander mainly selects domestic accessories. Imported Outlander adopts imported original accessories. The second price. The price of domestic Outlander is lower than that of imported Outlander. Due to the reasons of accessories, the price Higher than.
The 4j12 engine used in the first few batches of newly launched models is imported. After the domestic production line is assembled and put into use, the engine will be domestically produced. When the joint venture brand car was first launched, many parts used in the car were imported, and some car engine assemblies were imported from the original.
1. The J11 engine is produced by Mitsubishi, produced in Japan, and imported from the original. At present, it is installed on the Outlander model. There are two models of 4J series engines, namely 4J11 (with a displacement of 0L) and 4J12 (with a displacement of 4L), all of which are naturally aspirated engines.
2. The origin of this engine is Japan, which is an engine of Mitsubishi Corporation. Mitsubishi is a Japanese automobile manufacturer. This engine is imported and produced in Japan. This engine is used in the Mitsubishi Outlander series.
3. The J11 engine is produced by Mitsubishi of Japan and imported from the original factory. At present, it is on the Outlander model. 4J.There are two models of series engines, 4J11 (0L displacement) and 4J12 (4L displacement), both of which are naturally aspirated engines.
4. The J11 engine is not domestic. The 4J11 engine is produced by Mitsubishi, produced in Japan, and imported from the original. After the domestic production line is put into production, it will be gradually assembled and produced, and it will take a long time to be completely domestically produced. The 4J11 engine is currently installed on the Outlander model.
5. The J11 engine is not domestic. The J11 engine is produced by Mitsubishi, produced in Japan, and imported from the pure original. After the domestic production line is put into production, it will be gradually assembled and produced, and it will take a long time to be completely domestically produced. The 4J11 engine is currently equipped with the Outlander model.
This engine is made in Japan and is a Mitsubishi engine.Mitsubishi is a Japanese car manufacturer. This engine is imported from Japan. This engine is used for Mitsubishi Outlander series models. 4j11 engine is 0...4j11 engine origin. This engine is made in Japan and is a Mitsubishi engine.
The J11 engine is produced by Mitsubishi, made in Japan, and imported from the original. At present, it is installed on the Outlander model. There are two models of 4J series engines, namely 4J11 (with a displacement of 0L) and 4J12 (with a displacement of 4L), all of which are naturally aspirated engines.
The J11 engine is produced by Mitsubishi of Japan and imported from the original factory. At present, it is on the Outlander model. There are two models of 4J series engines, 4J11 (0L displacement) and 4J12 (4L displacement), both of which are naturally aspirated engines.
The J11 engine is not domestic. The 4J11 engine is produced by Mitsubishi, produced in Japan, and imported from the original. After the domestic production line is put into production, it will be gradually assembled and produced, and it will take a long time to be completely domestically produced. The 4J11 engine is currently installed on the Outlander model.
The engines carried by the first batch of newly launched models are originally imported. After the domestic production line is assembled and put into use, this engine will be domestically produced.
The latest Mitsubishi brand equipped with MIVEC technology is the code-named 4J11 series engine, which is also the most advanced engine sequence in the entire Mitsubishi brand at present.
J11 engine is not domestic.The J11 engine is produced by Mitsubishi, produced in Japan, and imported from the pure original. After the domestic production line is put into production, it will be gradually assembled and produced, and it will take a long time to be completely domestically produced. The 4J11 engine is currently equipped with the Outlander model.
The J11 engine is not made in China. The 4J11 engine is produced by Mitsubishi of Japan and imported from the original factory. After the domestic production line is put into production, it will take a long time to assemble it gradually and fully localize it. The 4J11 engine is currently installed on the Outlander model. The 4J11 engine belongs to the 4K1 series, which is currently the most advanced in the entire Mitsubishi brand.
The engines carried by the first batch of newly launched models are originally imported. After the domestic production line is assembled and put into use, this engine will be domestically produced.
In fact, the 4J11 engine is not domestic.It is produced by Mitsubishi of Japan and imported from the original packaging. Although the domestic production line has been put into production, it will take longer for the full domestic production. Now, the 4J11 engine is installed on the Outlander model.
Trade data for transshipment analysis-APP, download it now, new users will receive a novice gift pack.
In terms of safety, ASX Jinxuan's safety is also very good. Its body can remain stable in extreme situations, and it is also equipped with a variety of safety configurations, such as ABS anti-lock system, ESP electronic stability system, vehicle anti-theft system, and other safety configurations, which can make you Feel more at ease while driving.
Strong power The powerful engine adopts advanced technology, and the engine is more powerful, with a maximum power of 126Kw and a maximum torque of 262Nm, which improves the acceleration performance of the car.In addition, the powerful engine adopts a new fuel system technology, which can effectively improve the acceleration performance of the car, so as to meet the needs of car driving.
In a word, in terms of off-road performance, the performance of Jinxuan ASX is relatively good. At this point, I believe that you have a comprehensive understanding of Mitsubishi's powerful ASX: the appearance design is good, the internal space is not bad, the power performance is good, the suspension tuning and four-wheel drive system are excellent, and the off-road performance is quite good.
Power: In terms of power, although it is not possible to step on the accelerator, it can immediately go far away. But I don't think it's new and dazzling. It feels quite strong to step on the accelerator and push the back, and it's also very easy to overtake. Although engine technology is not a high-ranking technology, it is very mature and can stand the test of time.
B11 has slightly better power. 4J11 is a new generation of products, but the power of the engine has decreased slightly, but the fuel consumption is lower.
The biggest difference between the J series and the 4B series is that the 4B series is a variable valve timing technology, and the 4J series is a variable valve lift technology. The technical route is energy-saving. The dynamics is slightly worse than that of the previous generation engine 4B11/4B12 engine, but the energy saving is significantly improved.
In addition, in terms of noise optimization, 4J11 is optimized for different engine speeds, so it will be relatively quiet during the whole driving process. Speak bluntly.One point, although there is no obvious improvement in the power of this engine, it is fuel-saving and quieter, which are also very important for home.
j11 engine is a 0-liter naturally aspirated engine. The maximum power of this engine is 122kw, the maximum torque is 201 Nm, the maximum power speed is 6,000 rpm, and the maximum torque speed is 4200 rpm. This engine is equipped with multi-point electric injection technology. , and the aluminum alloy cylinder head cylinder block is used.
The 20L 4B11 engine used for peak torque 175N·m4250rpm, the maximum power of the engine is 112kW6000rpm, the peak torque 197N·m4250rpm Mitsubishi Wing God has been released since 1973, and so far it has experienced 1 Generation 0, achieved brilliant results in the World Rally Championship.
The test drive model is a powertrain equipped with a set of 0L self-aspirated engine + CVT gearbox. The engine is no longer the original 4B11, but the same 4J11 as Outlander, which has better power and torque. In terms of gearbox, the manual transmission has been canceled and the S gear and L gear functions have been added.
J11 engine is not made in China. The 4J11 engine is produced by Mitsubishi of Japan and imported from the original factory. After the domestic production line is put into production, it will take a long time to assemble it gradually and fully localize it. The 4J11 engine is currently installed on the Outlander model. The 4J11 engine belongs to the 4K1 series, which is currently the most advanced in the entire Mitsubishi brand.
The two are mainly different in terms of auto parts, price and power. Spare parts Domestic Outlander: Domestic accessories are mainly selected. Imported Outlander: Imported original accessories are used. Price Domestic Outlander: The price is lower than that of imported ones.
4j12 for the first batches of newly launched modelsThe motive is imported. After the domestic production line is assembled and put into use, this engine will be domestically produced. When a joint venture brand car was first launched, many spare parts used in the car were imported, and some car engines were originally imported.
The two are mainly different in the price of auto parts and power. First, the domestic Outlander mainly selects domestic accessories. Imported Outlander adopts imported original accessories. The second price. The price of domestic Outlander is lower than that of imported Outlander. Due to the reasons of accessories, the price Higher than.
The 4j12 engine used in the first few batches of newly launched models is imported. After the domestic production line is assembled and put into use, the engine will be domestically produced. When the joint venture brand car was first launched, many parts used in the car were imported, and some car engine assemblies were imported from the original.
1. The J11 engine is produced by Mitsubishi, produced in Japan, and imported from the original. At present, it is installed on the Outlander model. There are two models of 4J series engines, namely 4J11 (with a displacement of 0L) and 4J12 (with a displacement of 4L), all of which are naturally aspirated engines.
2. The origin of this engine is Japan, which is an engine of Mitsubishi Corporation. Mitsubishi is a Japanese automobile manufacturer. This engine is imported and produced in Japan. This engine is used in the Mitsubishi Outlander series.
3. The J11 engine is produced by Mitsubishi of Japan and imported from the original factory. At present, it is on the Outlander model. 4J.There are two models of series engines, 4J11 (0L displacement) and 4J12 (4L displacement), both of which are naturally aspirated engines.
4. The J11 engine is not domestic. The 4J11 engine is produced by Mitsubishi, produced in Japan, and imported from the original. After the domestic production line is put into production, it will be gradually assembled and produced, and it will take a long time to be completely domestically produced. The 4J11 engine is currently installed on the Outlander model.
5. The J11 engine is not domestic. The J11 engine is produced by Mitsubishi, produced in Japan, and imported from the pure original. After the domestic production line is put into production, it will be gradually assembled and produced, and it will take a long time to be completely domestically produced. The 4J11 engine is currently equipped with the Outlander model.
This engine is made in Japan and is a Mitsubishi engine.Mitsubishi is a Japanese car manufacturer. This engine is imported from Japan. This engine is used for Mitsubishi Outlander series models. 4j11 engine is 0...4j11 engine origin. This engine is made in Japan and is a Mitsubishi engine.
The J11 engine is produced by Mitsubishi, made in Japan, and imported from the original. At present, it is installed on the Outlander model. There are two models of 4J series engines, namely 4J11 (with a displacement of 0L) and 4J12 (with a displacement of 4L), all of which are naturally aspirated engines.
The J11 engine is produced by Mitsubishi of Japan and imported from the original factory. At present, it is on the Outlander model. There are two models of 4J series engines, 4J11 (0L displacement) and 4J12 (4L displacement), both of which are naturally aspirated engines.
The J11 engine is not domestic. The 4J11 engine is produced by Mitsubishi, produced in Japan, and imported from the original. After the domestic production line is put into production, it will be gradually assembled and produced, and it will take a long time to be completely domestically produced. The 4J11 engine is currently installed on the Outlander model.
The engines carried by the first batch of newly launched models are originally imported. After the domestic production line is assembled and put into use, this engine will be domestically produced.
The latest Mitsubishi brand equipped with MIVEC technology is the code-named 4J11 series engine, which is also the most advanced engine sequence in the entire Mitsubishi brand at present.
J11 engine is not domestic.The J11 engine is produced by Mitsubishi, produced in Japan, and imported from the pure original. After the domestic production line is put into production, it will be gradually assembled and produced, and it will take a long time to be completely domestically produced. The 4J11 engine is currently equipped with the Outlander model.
The J11 engine is not made in China. The 4J11 engine is produced by Mitsubishi of Japan and imported from the original factory. After the domestic production line is put into production, it will take a long time to assemble it gradually and fully localize it. The 4J11 engine is currently installed on the Outlander model. The 4J11 engine belongs to the 4K1 series, which is currently the most advanced in the entire Mitsubishi brand.
The engines carried by the first batch of newly launched models are originally imported. After the domestic production line is assembled and put into use, this engine will be domestically produced.
In fact, the 4J11 engine is not domestic.It is produced by Mitsubishi of Japan and imported from the original packaging. Although the domestic production line has been put into production, it will take longer for the full domestic production. Now, the 4J11 engine is installed on the Outlander model.
HS code-based cost modeling for imports
author: 2024-12-23 22:25Trade intelligence for aerospace industry
author: 2024-12-23 22:19Trade data for market entry strategies
author: 2024-12-23 21:33Global trade data enrichment services
author: 2024-12-23 20:44Comparative trade route analysis
author: 2024-12-23 20:38Data-driven trade partner selection
author: 2024-12-23 21:53Dairy imports HS code references
author: 2024-12-23 21:41HS code-based inbound logistics optimization
author: 2024-12-23 21:18End-to-end shipment tracking solutions
author: 2024-12-23 20:51Predictive models for trade demand
author: 2024-12-23 20:12619.57MB
Check591.28MB
Check619.73MB
Check517.32MB
Check287.26MB
Check624.98MB
Check878.16MB
Check183.77MB
Check219.16MB
Check923.59MB
Check442.28MB
Check718.51MB
Check126.26MB
Check227.81MB
Check548.11MB
Check543.17MB
Check693.16MB
Check912.16MB
Check894.92MB
Check528.97MB
Check947.56MB
Check964.81MB
Check112.62MB
Check831.58MB
Check335.79MB
Check165.31MB
Check513.31MB
Check863.51MB
Check348.12MB
Check731.91MB
Check466.24MB
Check482.72MB
Check233.65MB
Check946.74MB
Check689.58MB
Check653.78MB
CheckScan to install
Trade data for transshipment analysis to discover more
Netizen comments More
2595 HS code-based supply risk mitigation
2024-12-23 22:21 recommend
735 European Union HS code verification
2024-12-23 22:09 recommend
1143 Supplier relationship management with trade data
2024-12-23 21:39 recommend
2223 Customized HS code dashboards
2024-12-23 20:23 recommend
2480 shipment data access
2024-12-23 19:50 recommend