The correct way to use the seat belt is as follows: the position of the seat belt cannot be placed under or behind the arm. The position of the seat belt should not exceed the face and neck. It is recommended that children aged 4-12 sit tall and fasten their seat belts. Children can choose children's safety cushions and seats to reduce damage to children's chest and head and neck during collision.
The correct way to wear a seat belt. The main function of the seat belt shoulder strap and belt is to cushion the forward or backward inertia of the driver and passenger in the event of an accident, and to fix it on the seat as much as possible.When wearing a seat belt correctly, the shoulder strap should cross the chest cavity, and the belt should be close to the hip bone.
The correct way to wear the vehicle seat belt is to: adjust the height of the seat belt; make the seat belt cross the center of the shoulder to prevent it from cutting the neck too high or slipping too low; keep the waist tight to prevent the human body from slipping off the belt or damaging the waist.
1. Four points of car seat belts Correct wearing and understanding seat belts Car seat belts are the most basic and effective in-car safety protection devices. In the event of an unexpected situation, the degree and strength of the collision between the people in the car and the vehicle itself can be maximized.
2. The correct way to wear a vehicle seat belt is: adjust the height of the seat belt;Put the seat belt across the center of the shoulder to prevent it from cutting the neck too high or slipping too low; keep the waist tightly tied to prevent the human body from slipping off the belt or damaging the waist.
3. According to the regulations, you must wear a seat belt when driving, otherwise you will be fined 200 yuan and deducted 2 points. When driving, you should concentrate and don't be distracted.
4. The method of wearing a car seat belt is very simple. The specific steps are as follows: 1. Press the adjustment switch on the seat belt B pillar to adjust the seat belt to a height suitable for the driver and passengers. Pull the seat belt so that the shoulder strap of the seat belt passes through the chest cavity, the strap is close to the hip bone, and then insert the plug of the seat belt into the card slot.
1. The first step in using the seat belt is to adjust the position of the seat belt shoulder.The seat belt position adjustment mechanism is located near the b residence, which can be moved up and down to make the three-point seat belt adapt to drivers of different heights.
2. The seat belt of the long-distance bus is located on both sides of the seat, so it is enough to tie the seat belt to the waist from both sides of the body. When using the seat belt buckle at the same time, slowly lengthen the seat belt until the seat belt can fit with the snap buckle. When using the seat belt, ensure the correct wearing position of the seat belt will The connecting part of the seat belt is fastened.
3. The first step in using a seat belt is to adjust the position of the seat belt shoulder. The seat belt position adjustment mechanism is located near the B residence, which can be moved up and down, so that the three-point seat belt adapts to drivers at different heights. Seat belts were born in car racing.
The correct way to wear a seat belt The main function of the seat belt shoulder strap and belt is to buffer the inertia of the driver and passenger forward or backward in the event of an accident, and to fix it on the seat as much as possible. When wearing a seat belt correctly, the shoulder strap should cross the chest cavity, and the belt should be close to the hip bone.
Car seat belts play a restraining displacement and buffering role. When the vehicle collides or uses emergency braking, the pre-tightening device of the car seat belt will be closed instantly, tightening the loose seat belt when the belt is tightened, and the driver and passenger are firmly tied to the seat to prevent a second collision.
The key function of the shoulder straps and belts of the seat belt is to cushion the driver and passenger's forward or backward inertia in the event of an accident and fix it to the seat as much as possible.Introduction to the use of car seat belts: Introduction The retractor is the most complex mechanical part of the seat belt, which is used to store the webbing and lock the webbing from being pulled out.
Car seat belts are safety devices to restrain the occupants in the event of a collision and to avoid a second collision between the occupant with the steering wheel and dashboard, etc. during the collision or to avoid rushing out of the car and causing death and injury during the collision. Car seat belts, also known as seat belts, are a kind of occupant restraint device.
A cost-effective car must first have excellent safety performance. The most basic safety configuration of a car is a seat belt. How to use a seat belt correctly? It is necessary to explain clearly here.
*
Trade data for chemical imports-APP, download it now, new users will receive a novice gift pack.
The correct way to use the seat belt is as follows: the position of the seat belt cannot be placed under or behind the arm. The position of the seat belt should not exceed the face and neck. It is recommended that children aged 4-12 sit tall and fasten their seat belts. Children can choose children's safety cushions and seats to reduce damage to children's chest and head and neck during collision.
The correct way to wear a seat belt. The main function of the seat belt shoulder strap and belt is to cushion the forward or backward inertia of the driver and passenger in the event of an accident, and to fix it on the seat as much as possible.When wearing a seat belt correctly, the shoulder strap should cross the chest cavity, and the belt should be close to the hip bone.
The correct way to wear the vehicle seat belt is to: adjust the height of the seat belt; make the seat belt cross the center of the shoulder to prevent it from cutting the neck too high or slipping too low; keep the waist tight to prevent the human body from slipping off the belt or damaging the waist.
1. Four points of car seat belts Correct wearing and understanding seat belts Car seat belts are the most basic and effective in-car safety protection devices. In the event of an unexpected situation, the degree and strength of the collision between the people in the car and the vehicle itself can be maximized.
2. The correct way to wear a vehicle seat belt is: adjust the height of the seat belt;Put the seat belt across the center of the shoulder to prevent it from cutting the neck too high or slipping too low; keep the waist tightly tied to prevent the human body from slipping off the belt or damaging the waist.
3. According to the regulations, you must wear a seat belt when driving, otherwise you will be fined 200 yuan and deducted 2 points. When driving, you should concentrate and don't be distracted.
4. The method of wearing a car seat belt is very simple. The specific steps are as follows: 1. Press the adjustment switch on the seat belt B pillar to adjust the seat belt to a height suitable for the driver and passengers. Pull the seat belt so that the shoulder strap of the seat belt passes through the chest cavity, the strap is close to the hip bone, and then insert the plug of the seat belt into the card slot.
1. The first step in using the seat belt is to adjust the position of the seat belt shoulder.The seat belt position adjustment mechanism is located near the b residence, which can be moved up and down to make the three-point seat belt adapt to drivers of different heights.
2. The seat belt of the long-distance bus is located on both sides of the seat, so it is enough to tie the seat belt to the waist from both sides of the body. When using the seat belt buckle at the same time, slowly lengthen the seat belt until the seat belt can fit with the snap buckle. When using the seat belt, ensure the correct wearing position of the seat belt will The connecting part of the seat belt is fastened.
3. The first step in using a seat belt is to adjust the position of the seat belt shoulder. The seat belt position adjustment mechanism is located near the B residence, which can be moved up and down, so that the three-point seat belt adapts to drivers at different heights. Seat belts were born in car racing.
The correct way to wear a seat belt The main function of the seat belt shoulder strap and belt is to buffer the inertia of the driver and passenger forward or backward in the event of an accident, and to fix it on the seat as much as possible. When wearing a seat belt correctly, the shoulder strap should cross the chest cavity, and the belt should be close to the hip bone.
Car seat belts play a restraining displacement and buffering role. When the vehicle collides or uses emergency braking, the pre-tightening device of the car seat belt will be closed instantly, tightening the loose seat belt when the belt is tightened, and the driver and passenger are firmly tied to the seat to prevent a second collision.
The key function of the shoulder straps and belts of the seat belt is to cushion the driver and passenger's forward or backward inertia in the event of an accident and fix it to the seat as much as possible.Introduction to the use of car seat belts: Introduction The retractor is the most complex mechanical part of the seat belt, which is used to store the webbing and lock the webbing from being pulled out.
Car seat belts are safety devices to restrain the occupants in the event of a collision and to avoid a second collision between the occupant with the steering wheel and dashboard, etc. during the collision or to avoid rushing out of the car and causing death and injury during the collision. Car seat belts, also known as seat belts, are a kind of occupant restraint device.
A cost-effective car must first have excellent safety performance. The most basic safety configuration of a car is a seat belt. How to use a seat belt correctly? It is necessary to explain clearly here.
*
Granular HS code detail for compliance officers
author: 2024-12-24 01:54Machinery exports HS code insights
author: 2024-12-24 01:54How to implement JIT with global data
author: 2024-12-24 01:36Dynamic commodity risk indexing
author: 2024-12-24 01:30Industrial lubricants HS code classification
author: 2024-12-24 00:03Trade data for market diversification
author: 2024-12-24 01:17Tariff reduction opportunity analysis
author: 2024-12-24 00:32Ready-to-eat meals HS code classification
author: 2024-12-23 23:21HS code-based cargo consolidation tools
author: 2024-12-23 23:19853.68MB
Check623.74MB
Check629.54MB
Check957.34MB
Check913.42MB
Check226.84MB
Check449.24MB
Check117.41MB
Check839.79MB
Check328.76MB
Check267.26MB
Check472.84MB
Check674.91MB
Check299.29MB
Check649.77MB
Check316.71MB
Check899.32MB
Check799.17MB
Check514.35MB
Check762.19MB
Check771.33MB
Check875.37MB
Check568.29MB
Check657.14MB
Check955.95MB
Check545.16MB
Check526.44MB
Check554.18MB
Check596.72MB
Check255.16MB
Check817.57MB
Check289.28MB
Check469.43MB
Check845.79MB
Check959.35MB
Check432.78MB
CheckScan to install
Trade data for chemical imports to discover more
Netizen comments More
2318 Predictive trade route realignment
2024-12-24 00:42 recommend
74 HS code filters for bulk commodities
2024-12-24 00:06 recommend
2209 End-to-end shipment management
2024-12-23 23:58 recommend
2299 HS code-based market readiness assessments
2024-12-23 23:48 recommend
515 Industrial gases HS code verification
2024-12-23 23:24 recommend