1. Generally speaking, it is enough to install two frequency dividers, that is, the left front door all the way and the right front door all the way; if your car stereo is four-way, generally use full-frequency or coaxial speaker in the middle row, and there is no need to divide the frequency.
2. Use a special cable for tweeter to connect: Buy a special cable for tweeter, which can be purchased in car audio stores or electronic markets. Manually unplug the on-board power supply to prevent circuit short circuit or electric shock accident. Use the tool to open the fixed bracket of the original speaker and remove the original speaker.
3. First of all, remove the panel with central control switch, electric window switch and other control components.
4. The method is as follows: place a frequency divider in the left front door position of the dashboard. Install another frequency divider at the position of the right front door. Connect a capacitor (the recommended capacity is between 0.1F and 0.2F) in series on the tweeter. Then connect it directly in parallel to the mid-woofer.
5. At the foot pedal. According to the query of Baidu Youjia information, the treble and bass of the car horn are installed on the foot pedal, which can obtain the best sound field and the best imaging force in most car audio modifications.
6. Installation method: Generally installed on the water tank frame, there are 2, one treble and one low note. Don't make a mistake when buying. It's easy to replace. Unplug the plug, remove the installation screw, and replace it with a new one.
In fact, there is no need to install it in the rear The door is equipped with a speaker. Generally, horns will be installed in the front-row driving and seating positions. Therefore, if the horn is installed at the rear door, there is no need to install a low-end version of the car. Even some models, if the whole model releases speakers, it will look particularly low-end.Therefore, it is recommended that you do not install the back door speaker.
In fact, there is no need to install speakers on the rear door of the car. In general, the speaker will be installed in the driving and seating positions of the front row of the car. Therefore, if the speaker is installed in the back door, there is no need for low-end cars, and even some cars will feel particularly low-end if all the speakers are released. Therefore, it is recommended that you do not install the speaker on the rear door of the car.
The horn of the rear door of the car is not a necessary car accessory, because the people in the car are generally the driver and passengers in the front row, so the horn of the front door can be used. And the speaker of the rear door needs to be rewired. If it is not very ambitious for the use of the car, there is no need to install it.
It's not necessary. There are few people in the back. The two in the front are enough [If there is something wrong with the car, ask the car master.4S store professional technician, 10 minutes to solve.
If the subwoofer is placed in the back and there is no loudspeaker around, the back row staff will be too stuffy to park and a little uncomfortable. Of course, you can turn down the effect of the subwoofer, which may be better, but since it has been modified, it is recommended to install a speaker on the back door.
Is it necessary to add a rear door to the original car with only two horns? The answer is: The original car only has two speakers and it is necessary to add a rear door, because the sound effect of four speakers is better.
1. If the original car only has two horns, if you want to install two more horns, you can choose to install it at the rear of the vehicle or on the door. You need to buy two new speakers and some tools needed for installation, such as screwdrivers, wires, etc.
2. The original car is single-wire, and it is not difficult to connect a double-wire horn. After the speaker is fixed, a wiring column is connected to the car body, and another wiring column is connected to the original car horn wire. If the original car speaker is negative control, one wiring column is connected to the positive pole of the battery, and the other wiring column is connected to the control line of the original car horn, that is, negative Extreme.
3. The car is equipped with a horn, find the installation of the horn on the car, and connect the two wires of the horn to the two wires of the car. Horns are divided into several different instruments, a kind of wind instrument, which is thin at the top and thick on the bottom, mostly made of copper. The other is a modern electroacoustic component, which converts electrical signals into sound, also known as speakers.
4. Only in this way can a better sound field be formed. The installation method is also mostly in the position of the original car tweeter or installed in the A pillar after the A-pillar reverse mold.The installation of the mid-tone speaker should be more convenient. It is generally installed in the original position of the car speaker. And the woofer should be installed in the lower sound field as much as possible, such as under the car seat.
5. If you just buy and install an ordinary stereo sound system, car owners had better place the rear door speaker of their car at the rear door of the car. If the AV system is installed, in order to pursue the surround effect, it can imitate Japanese and American cars, and horns can be installed in the rear pillow.
6. Hello, you can ask the 4S store to install the stereo. They have professional personnel. Don't install it privately.
How to identify export-ready products-APP, download it now, new users will receive a novice gift pack.
1. Generally speaking, it is enough to install two frequency dividers, that is, the left front door all the way and the right front door all the way; if your car stereo is four-way, generally use full-frequency or coaxial speaker in the middle row, and there is no need to divide the frequency.
2. Use a special cable for tweeter to connect: Buy a special cable for tweeter, which can be purchased in car audio stores or electronic markets. Manually unplug the on-board power supply to prevent circuit short circuit or electric shock accident. Use the tool to open the fixed bracket of the original speaker and remove the original speaker.
3. First of all, remove the panel with central control switch, electric window switch and other control components.
4. The method is as follows: place a frequency divider in the left front door position of the dashboard. Install another frequency divider at the position of the right front door. Connect a capacitor (the recommended capacity is between 0.1F and 0.2F) in series on the tweeter. Then connect it directly in parallel to the mid-woofer.
5. At the foot pedal. According to the query of Baidu Youjia information, the treble and bass of the car horn are installed on the foot pedal, which can obtain the best sound field and the best imaging force in most car audio modifications.
6. Installation method: Generally installed on the water tank frame, there are 2, one treble and one low note. Don't make a mistake when buying. It's easy to replace. Unplug the plug, remove the installation screw, and replace it with a new one.
In fact, there is no need to install it in the rear The door is equipped with a speaker. Generally, horns will be installed in the front-row driving and seating positions. Therefore, if the horn is installed at the rear door, there is no need to install a low-end version of the car. Even some models, if the whole model releases speakers, it will look particularly low-end.Therefore, it is recommended that you do not install the back door speaker.
In fact, there is no need to install speakers on the rear door of the car. In general, the speaker will be installed in the driving and seating positions of the front row of the car. Therefore, if the speaker is installed in the back door, there is no need for low-end cars, and even some cars will feel particularly low-end if all the speakers are released. Therefore, it is recommended that you do not install the speaker on the rear door of the car.
The horn of the rear door of the car is not a necessary car accessory, because the people in the car are generally the driver and passengers in the front row, so the horn of the front door can be used. And the speaker of the rear door needs to be rewired. If it is not very ambitious for the use of the car, there is no need to install it.
It's not necessary. There are few people in the back. The two in the front are enough [If there is something wrong with the car, ask the car master.4S store professional technician, 10 minutes to solve.
If the subwoofer is placed in the back and there is no loudspeaker around, the back row staff will be too stuffy to park and a little uncomfortable. Of course, you can turn down the effect of the subwoofer, which may be better, but since it has been modified, it is recommended to install a speaker on the back door.
Is it necessary to add a rear door to the original car with only two horns? The answer is: The original car only has two speakers and it is necessary to add a rear door, because the sound effect of four speakers is better.
1. If the original car only has two horns, if you want to install two more horns, you can choose to install it at the rear of the vehicle or on the door. You need to buy two new speakers and some tools needed for installation, such as screwdrivers, wires, etc.
2. The original car is single-wire, and it is not difficult to connect a double-wire horn. After the speaker is fixed, a wiring column is connected to the car body, and another wiring column is connected to the original car horn wire. If the original car speaker is negative control, one wiring column is connected to the positive pole of the battery, and the other wiring column is connected to the control line of the original car horn, that is, negative Extreme.
3. The car is equipped with a horn, find the installation of the horn on the car, and connect the two wires of the horn to the two wires of the car. Horns are divided into several different instruments, a kind of wind instrument, which is thin at the top and thick on the bottom, mostly made of copper. The other is a modern electroacoustic component, which converts electrical signals into sound, also known as speakers.
4. Only in this way can a better sound field be formed. The installation method is also mostly in the position of the original car tweeter or installed in the A pillar after the A-pillar reverse mold.The installation of the mid-tone speaker should be more convenient. It is generally installed in the original position of the car speaker. And the woofer should be installed in the lower sound field as much as possible, such as under the car seat.
5. If you just buy and install an ordinary stereo sound system, car owners had better place the rear door speaker of their car at the rear door of the car. If the AV system is installed, in order to pursue the surround effect, it can imitate Japanese and American cars, and horns can be installed in the rear pillow.
6. Hello, you can ask the 4S store to install the stereo. They have professional personnel. Don't install it privately.
HS code compliance in African unions
author: 2024-12-23 22:49Agriculture HS code-based quota allocation
author: 2024-12-23 22:24Trade data-driven contract negotiations
author: 2024-12-23 21:25Trade data solutions for retail
author: 2024-12-23 21:06High-value machinery HS code classification
author: 2024-12-23 21:00Carbon steel HS code references
author: 2024-12-23 22:46Global HS code classification standards
author: 2024-12-23 22:21HS code-based opportunity scanning
author: 2024-12-23 20:42Plant-based proteins HS code verification
author: 2024-12-23 20:37
Electronics global shipment tracking
297.93MB
Check
HS code integration with digital customs forms
834.93MB
Check
How to facilitate cross-border returns
428.79MB
Check
Packaging industry HS code references
631.73MB
Check
Trade data for transshipment analysis
469.37MB
Check
HS code-based negotiation with customs
316.25MB
Check
Data-driven supplier diversity programs
349.69MB
Check
Textile supply chain HS code mapping
149.59MB
Check
HS code segmentation for retail imports
412.23MB
Check
Industrial cleaning supplies HS code checks
581.89MB
Check
How to measure trade KPIs
745.53MB
Check
import export database
113.78MB
Check
Global trade contract verification
311.33MB
Check
HS code classification tools
137.57MB
Check
HS code analytics for value-added products
819.47MB
Check
Trade data-driven contract negotiations
371.46MB
Check
HS code-driven freight route adjustments
848.78MB
Check
Trade data-driven inventory optimization
173.96MB
Check
Global regulatory compliance by HS code
885.78MB
Check
Trade intelligence for marine cargo
149.32MB
Check
HS code-based vendor qualification
253.92MB
Check
Trade data-driven contract negotiations
477.47MB
Check
Nutraceuticals HS code verification
496.94MB
Check
HS code-based market share analysis
375.43MB
Check
Industry-wise trade data breakdowns
888.21MB
Check
Asia trade corridors HS code mapping
518.55MB
Check
HS code alignment with import quotas
763.58MB
Check
Trade data for intellectual property checks
189.69MB
Check
Free global trade data sources
226.43MB
Check
Organic chemicals (HS code ) patterns
591.71MB
Check
How to interpret global trade indices
618.72MB
Check
Trade data-driven policy analysis
999.72MB
Check
Sustainable supply chain analytics
436.16MB
Check
Top import export compliance guides
364.75MB
Check
Ceramic tiles HS code classification
822.79MB
Check
Global HS code standardization efforts
385.46MB
Check
Scan to install
How to identify export-ready products to discover more
Netizen comments More
205 Data-driven trade partner selection
2024-12-23 23:08 recommend
1394 HS code-based customs broker RFPs
2024-12-23 22:19 recommend
1509 Dairy products HS code verification
2024-12-23 22:19 recommend
1011 How to use analytics for HS classification
2024-12-23 21:49 recommend
896 Top-rated trade management software
2024-12-23 21:08 recommend