There are the following normal reasons for the abnormal sound of the engine compartment after parking: the cooling sound of the ternary catalyst: the normal working temperature of the ternary catalyst The degree is 400~800 degrees. After the ignition is turned off, its work will slowly stop, the temperature will also drop, and the internal metal parts will undergo thermal expansion and cold contraction, and then make a strange sound.
It's normal that the engine will still ring when the car is turned off. In order to prevent the temperature from cooling down quickly after the engine stops, it is "holding the cylinder". Maybe some car owners are parking their cars.After entering the garage and turning off the engine, you will hear the sound of "popping" from the bottom of the car. In fact, the "culprit" is the ternary catalyst located at the rear of the vehicle chassis.
The reasons are as follows: the clicking sound at the bottom of the vehicle may come from a ternary catalyst. The working temperature of the catalyst is as high as 1000℃. After extinguishing the fire, the internal metal parts will undergo thermal expansion and contraction, accompanied by a clattling sound. The engine cooling system may also be working.
The engine compartment has been ringing when the car is turned off. The sound at the bottom of the vehicle may come from a ternary catalyst. The working temperature of the ternary catalyst is close to 1,000 degrees Celsius. After the ignition is turned off, the internal metal parts will undergo thermal expansion and cold contraction, accompanied by some rattling sounds. It is also possible that the engine cooling system is working.
1. The reason why the engine is turned off and still makes a sound is that the clicking sound at the bottom of the vehicle may come from a ternary catalyst. The working temperature of the ternary catalyst is close to 1000After the Celsius engine is turned off, the internal metal parts will heat expand and shrink, accompanied by some rattling sounds; it is also possible that the engine cooling system is working.
2. Uneven engine cooling: After the car runs for a period of time, the engine temperature is very high. After the car is turned off, the temperature of each component will drop in a certain proportion, which will inevitably cause the friction between the internal metal parts of the engine to produce abnormal noise due to cooling and contraction.
3. The reasons for the engine buzzing after the car is turned off are the loose screw of the ternary catalyst interface, the damage to the magnet valve of the carbon tank, the poor operation of the suction and pull motor of the starter, and the abnormal noise caused by uneven engine cooling. The screw of the ternary catalyst interface position is loose: hot expansion and cold contraction after turning off will cause the abnormal sound to be more obvious. Solution: Just tighten the screw.
4. The water temperature is too high.The cooling fan of the engine will automatically cool down and stop turning after the water temperature drops. If this phenomenon occurs frequently, check whether the engine cooling water is insufficient, or other reasons cause the engine temperature to be too high. Flying car. It's true that the engine can't be turned off, and the piston and crankshaft are still turning.
5. The reasons are as follows: the clicking sound at the bottom of the vehicle may come from a ternary catalyst. The working temperature of the catalyst is as high as 1000℃. After extinguishing the fire, the internal metal parts will undergo thermal expansion and contraction, accompanied by a clattling sound. The engine cooling system may also be working.
1. There are two reasons: the cooling fan of the engine is automatically lowered.Temperature When the engine temperature is too high, even if the car is turned off, the key is pulled away from the car, and its cooling system will still automatically start to cool the engine system. The reason for the beeping sound is the sound of the electronic fan running at high speed.
2. It's normal for the engine to sound when the car is turned off. In order to prevent the temperature from cooling down rapidly after the engine stops, it is "holding the cylinder". Some car owners may hear a "pop" sound from the bottom of the car after parking the car in the garage and turning off the engine. In fact, the "culprit" is the ternary catalyst located at the tail of the vehicle chassis.
3. Even if the car has stopped and turned off, the engine will still make a sound, which is also a very normal phenomenon. In order to prevent the temperature from falling rapidly, you need to "hold the cylinder" after parking.
1. The reasons are as follows: The clicking sound at the bottom of the vehicle may come from the ternary catalyst. The working temperature of the catalyst is as high as 1000℃. After extinguishing the fire, the internal metal parts will undergo thermal expansion and contraction, accompanied by a clattling sound. The engine cooling system may also be working.
2. It's normal for the engine to sound when the car is turned off. In order to prevent the temperature from cooling down rapidly after the engine stops, it is "holding the cylinder". Some car owners may hear a "pop" sound from the bottom of the car after parking the car in the garage and turning off the engine. In fact, the "culprit" is the ternary catalyst located at the tail of the vehicle chassis.
3. The reason why the engine is still noisy when the engine is turned off is that the clicking sound at the bottom of the vehicle may come from a ternary catalyst.The working temperature of the ternary catalyst is close to 1000 degrees Celsius. After the engine is turned off, the internal metal parts will undergo thermal expansion and cold contraction, accompanied by some rattling sounds; it is also possible that the engine cooling system is working.
4. The water temperature is too high. The cooling fan of the engine will automatically cool down and stop turning after the water temperature drops. If this phenomenon occurs frequently, check whether the engine cooling water is insufficient, or other reasons cause the engine temperature to be too high. Flying car. It's true that the engine can't be turned off, and the piston and crankshaft are still turning.
5. The water temperature is too high. The cooling fan of the engine will automatically cool down and stop turning after the water temperature drops. If this phenomenon occurs frequently, it is necessary to check whether the engine cooling water is insufficient or other reasons affect the engine temperature. Speeding.It's true that the engine can't be extinguished. The piston and crankshaft are still running.
1. Uneven engine cooling: After the car runs for a period of time, the engine temperature is very high. After the car is turned off, the temperature of each component will drop in a certain proportion, which will inevitably cause the friction between the internal metal parts of the engine to produce abnormal noise due to cooling and contraction.
2. The water temperature is too high. The cooling fan of the engine will automatically cool down and stop turning after the water temperature drops. If this phenomenon occurs frequently, check whether the engine cooling water is insufficient, or other reasons cause the engine temperature to be too high. Flying car. It's true that the engine can't be turned off, and the piston and crankshaft are still turning.
3. This is a very normal operation. Even if the car has stopped and turned off, the engine will still make a sound, which is also a normal phenomenon. In order to prevent the temperature from falling rapidly, you need to "hold the cylinder" after parking.
4. The car is turned off, but the engine is still noisy. This situation is usually caused by some reason that the engine has not stopped completely. The following are the possible reasons and solutions: the air-combustion ratio is too thick or too thin. If the proportion of air and fuel is incorrect, the engine will make an abnormal noise when running.
5. It's normal for the engine to sound when the car is turned off. In order to prevent the temperature from cooling down rapidly after the engine stops, it is "holding the cylinder". Maybe some car owners will hear the bottom of the car after parking the car in the garage and turning off the engine.There is a "pop" sound. In fact, the "culprit" is the ternary catalyst located at the rear of the vehicle chassis.
6. There are two reasons: automatic cooling of the engine cooling fan: when the engine temperature is too high, even if the car is turned off, the key will leave the car, and its cooling system will automatically start and cool the engine system. The reason for the whistling sound is the sound of the electronic fan running at high speed.
Trade data for resource allocation-APP, download it now, new users will receive a novice gift pack.
There are the following normal reasons for the abnormal sound of the engine compartment after parking: the cooling sound of the ternary catalyst: the normal working temperature of the ternary catalyst The degree is 400~800 degrees. After the ignition is turned off, its work will slowly stop, the temperature will also drop, and the internal metal parts will undergo thermal expansion and cold contraction, and then make a strange sound.
It's normal that the engine will still ring when the car is turned off. In order to prevent the temperature from cooling down quickly after the engine stops, it is "holding the cylinder". Maybe some car owners are parking their cars.After entering the garage and turning off the engine, you will hear the sound of "popping" from the bottom of the car. In fact, the "culprit" is the ternary catalyst located at the rear of the vehicle chassis.
The reasons are as follows: the clicking sound at the bottom of the vehicle may come from a ternary catalyst. The working temperature of the catalyst is as high as 1000℃. After extinguishing the fire, the internal metal parts will undergo thermal expansion and contraction, accompanied by a clattling sound. The engine cooling system may also be working.
The engine compartment has been ringing when the car is turned off. The sound at the bottom of the vehicle may come from a ternary catalyst. The working temperature of the ternary catalyst is close to 1,000 degrees Celsius. After the ignition is turned off, the internal metal parts will undergo thermal expansion and cold contraction, accompanied by some rattling sounds. It is also possible that the engine cooling system is working.
1. The reason why the engine is turned off and still makes a sound is that the clicking sound at the bottom of the vehicle may come from a ternary catalyst. The working temperature of the ternary catalyst is close to 1000After the Celsius engine is turned off, the internal metal parts will heat expand and shrink, accompanied by some rattling sounds; it is also possible that the engine cooling system is working.
2. Uneven engine cooling: After the car runs for a period of time, the engine temperature is very high. After the car is turned off, the temperature of each component will drop in a certain proportion, which will inevitably cause the friction between the internal metal parts of the engine to produce abnormal noise due to cooling and contraction.
3. The reasons for the engine buzzing after the car is turned off are the loose screw of the ternary catalyst interface, the damage to the magnet valve of the carbon tank, the poor operation of the suction and pull motor of the starter, and the abnormal noise caused by uneven engine cooling. The screw of the ternary catalyst interface position is loose: hot expansion and cold contraction after turning off will cause the abnormal sound to be more obvious. Solution: Just tighten the screw.
4. The water temperature is too high.The cooling fan of the engine will automatically cool down and stop turning after the water temperature drops. If this phenomenon occurs frequently, check whether the engine cooling water is insufficient, or other reasons cause the engine temperature to be too high. Flying car. It's true that the engine can't be turned off, and the piston and crankshaft are still turning.
5. The reasons are as follows: the clicking sound at the bottom of the vehicle may come from a ternary catalyst. The working temperature of the catalyst is as high as 1000℃. After extinguishing the fire, the internal metal parts will undergo thermal expansion and contraction, accompanied by a clattling sound. The engine cooling system may also be working.
1. There are two reasons: the cooling fan of the engine is automatically lowered.Temperature When the engine temperature is too high, even if the car is turned off, the key is pulled away from the car, and its cooling system will still automatically start to cool the engine system. The reason for the beeping sound is the sound of the electronic fan running at high speed.
2. It's normal for the engine to sound when the car is turned off. In order to prevent the temperature from cooling down rapidly after the engine stops, it is "holding the cylinder". Some car owners may hear a "pop" sound from the bottom of the car after parking the car in the garage and turning off the engine. In fact, the "culprit" is the ternary catalyst located at the tail of the vehicle chassis.
3. Even if the car has stopped and turned off, the engine will still make a sound, which is also a very normal phenomenon. In order to prevent the temperature from falling rapidly, you need to "hold the cylinder" after parking.
1. The reasons are as follows: The clicking sound at the bottom of the vehicle may come from the ternary catalyst. The working temperature of the catalyst is as high as 1000℃. After extinguishing the fire, the internal metal parts will undergo thermal expansion and contraction, accompanied by a clattling sound. The engine cooling system may also be working.
2. It's normal for the engine to sound when the car is turned off. In order to prevent the temperature from cooling down rapidly after the engine stops, it is "holding the cylinder". Some car owners may hear a "pop" sound from the bottom of the car after parking the car in the garage and turning off the engine. In fact, the "culprit" is the ternary catalyst located at the tail of the vehicle chassis.
3. The reason why the engine is still noisy when the engine is turned off is that the clicking sound at the bottom of the vehicle may come from a ternary catalyst.The working temperature of the ternary catalyst is close to 1000 degrees Celsius. After the engine is turned off, the internal metal parts will undergo thermal expansion and cold contraction, accompanied by some rattling sounds; it is also possible that the engine cooling system is working.
4. The water temperature is too high. The cooling fan of the engine will automatically cool down and stop turning after the water temperature drops. If this phenomenon occurs frequently, check whether the engine cooling water is insufficient, or other reasons cause the engine temperature to be too high. Flying car. It's true that the engine can't be turned off, and the piston and crankshaft are still turning.
5. The water temperature is too high. The cooling fan of the engine will automatically cool down and stop turning after the water temperature drops. If this phenomenon occurs frequently, it is necessary to check whether the engine cooling water is insufficient or other reasons affect the engine temperature. Speeding.It's true that the engine can't be extinguished. The piston and crankshaft are still running.
1. Uneven engine cooling: After the car runs for a period of time, the engine temperature is very high. After the car is turned off, the temperature of each component will drop in a certain proportion, which will inevitably cause the friction between the internal metal parts of the engine to produce abnormal noise due to cooling and contraction.
2. The water temperature is too high. The cooling fan of the engine will automatically cool down and stop turning after the water temperature drops. If this phenomenon occurs frequently, check whether the engine cooling water is insufficient, or other reasons cause the engine temperature to be too high. Flying car. It's true that the engine can't be turned off, and the piston and crankshaft are still turning.
3. This is a very normal operation. Even if the car has stopped and turned off, the engine will still make a sound, which is also a normal phenomenon. In order to prevent the temperature from falling rapidly, you need to "hold the cylinder" after parking.
4. The car is turned off, but the engine is still noisy. This situation is usually caused by some reason that the engine has not stopped completely. The following are the possible reasons and solutions: the air-combustion ratio is too thick or too thin. If the proportion of air and fuel is incorrect, the engine will make an abnormal noise when running.
5. It's normal for the engine to sound when the car is turned off. In order to prevent the temperature from cooling down rapidly after the engine stops, it is "holding the cylinder". Maybe some car owners will hear the bottom of the car after parking the car in the garage and turning off the engine.There is a "pop" sound. In fact, the "culprit" is the ternary catalyst located at the rear of the vehicle chassis.
6. There are two reasons: automatic cooling of the engine cooling fan: when the engine temperature is too high, even if the car is turned off, the key will leave the car, and its cooling system will automatically start and cool the engine system. The reason for the whistling sound is the sound of the electronic fan running at high speed.
HS code mapping for duty optimization
author: 2024-12-24 01:42Country-specific HS code duty reclaims
author: 2024-12-24 00:31China trade data analysis tools
author: 2024-12-24 00:25HS code compliance for African Union members
author: 2024-12-24 00:20Agribusiness HS code-based analysis
author: 2024-12-23 23:37How to benchmark import export performance
author: 2024-12-24 01:27HS code-based supply risk mitigation
author: 2024-12-24 00:50Food and beverage HS code mapping
author: 2024-12-24 00:49HS code metrics for performance dashboards
author: 2024-12-23 23:57
Dynamic trade data cleansing
966.85MB
Check
Import data by HS code and country
126.66MB
Check
How to choose correct HS code in ASEAN
199.91MB
Check
How to reduce documentation errors
363.23MB
Check
How to integrate HS codes into BOMs
266.44MB
Check
HS code-based cargo insurance optimization
926.67MB
Check
Commodity price indexing by HS code
577.83MB
Check
Plastics (HS code ) import analysis
272.81MB
Check
HS code-driven risk mitigation
894.34MB
Check
Trade compliance automation tools
596.54MB
Check
HS code-based broker fee negotiations
229.46MB
Check
Industry-wise trade data breakdowns
296.32MB
Check
North American HS code tariff structures
117.94MB
Check
HS code segmentation for industrial chemicals
699.98MB
Check
Best Asia-Pacific trade analysis
943.16MB
Check
Metals and alloys HS code verification
716.73MB
Check
Cocoa and chocolate HS code insights
886.45MB
Check
How to integrate HS codes in ERP
977.17MB
Check
Global trade agreement analysis
316.76MB
Check
Pharmaceutical raw materials HS code checks
261.86MB
Check
Drilling equipment HS code mapping
394.54MB
Check
End-to-end global supply chain solutions
633.13MB
Check
Global trade flow optimization
582.72MB
Check
Trade data for market entry strategies
257.21MB
Check
Export planning using HS code data
728.52MB
Check
Agritech products HS code classification
555.86MB
Check
international suppliers data
914.26MB
Check
Medical PPE HS code verification
127.66MB
Check
APAC special tariff HS code listings
616.91MB
Check
HS code-driven market entry strategy
953.88MB
Check
Germany international trade insights
581.54MB
Check
Mining industry HS code analysis
732.18MB
Check
HS code-driven export incentives
317.97MB
Check
Trade compliance training resources
162.37MB
Check
API integration with HS code databases
297.54MB
Check
HS code-based global trend analysis
499.65MB
Check
Scan to install
Trade data for resource allocation to discover more
Netizen comments More
2010 Dynamic import export data modeling
2024-12-24 00:28 recommend
191 Furniture trade (HS code ) insights
2024-12-23 23:48 recommend
605 Trade data for risk scoring models
2024-12-23 23:33 recommend
1156 HS code utilization in bonded warehouses
2024-12-23 23:25 recommend
1826 Predictive models for trade demand
2024-12-23 23:03 recommend