2. The Focus 6 model adopts a 6-liter naturally aspirated engine from Ford products, with a maximum power of 107 horsepower and a peak torque of 145 Nm. Its power performance is excellent. It has good acceleration performance and economy in actual driving, which can meet the vast The driving needs of most consumers.
3. Four cylinders. According to Youjia, the 6L engine of the new Focus is already made in Chang'an Ford, code-named C6. This engine is a non-pressurized direct injection four-cylinder engine. It is a simplified version of the Ford 6LEcoboost supercharged direct injection engine, and the supercharger is removed.
4. Ford Focus is also equipped with 6LDragonTiVCT self-aspirated engine and 6LDragonThe GTDI turbocharged engine is matched with 6MT/6AT and 8AT gearboxes respectively. Focus is a car brand under Ford Motor Company in the United States, mainly producing family cars, SUVs, trucks and other models.
1. The engine used by the Fox 6 displacement model is the ti-vct engine. The engine of this model is made in Chang'an Ford. The code name is c6, which is a direct injection four-cylinder engine without supercharging effect.
2. Focus's 6Ti-VCT engine comes from Ford's 1995 Sigma engine. The engine is a double overhead camshaft (DOHC) in-line four-cylinder. The displacement is from 25 liters to 7 liters.
3. The new 6LTiVCT engine adopted by the new Focus is equipped with a dual variable door timing system. The power parameters are roughly at a maximum power of 92kw and a maximum torque of 152Nm, which is very close to the current 8L displacement of Chang'an Ford CAF483Q0 engine power output.But the fuel consumption is much lower than that of the 8L model.
4. Yes, the engine of the 17 Fox 6 is generally very good. It can reach more than 170 horsepower, which is completely sufficient in terms of power. Secondly, the biggest advantage of the naturally aspirated engine of 6 is that it is of good quality and stability. In addition, this engine is not picky about food, whether it is No. 92 gasoline or No. 95 gasoline.
In terms of body size, the length, width and height of the Ford Focus 2012 sedan are 4552mm/1823mm/1493mm, and the wheelbase is 2648mm. . The body length is 245mm higher than that of the previous two-box models, and the wheelbase is also increased by 52mm. Compared with models of the same class, its body size has obvious advantages.
In terms of appearance, the length, width and height of the 2012 new Fox sedan are 4530mm, 1823mm and 1468mm respectively. The wheelbase is 2619mm, the front suspension is 1550mm, and the rear suspension is 1577mm. The exterior design style of the whole vehicle is fashionable and dynamic. It adopts Ford's latest family-style front face design, which has a very high degree of recognition.
The front and rear wheelbases of the new Focus are 1553mm and 1544mm respectively, which is 18mm more than the 1535mm front wheelbase of the current model, and 11mm more than the rear wheelbase of 1531mm. Theoretically speaking, the lengthening of the new wheelbase means that the vehicle will be more stable when driving. This Goodyear Assurance Fuel Max Chinese used by Dingxin Fox.
Power configuration: The Focus sedan adopts Ford's most advanced powertrain, of which the 5L naturally aspirated engine has a performance comparable to that of a 0L self-aspirated engine, with a maximum horsepower of 118 horsepower and a peak torque of 146 Nm, and a 6-speed manual or 6-speed automatic transmission.
In terms of body size, the length, width and height of the new Focus are 4358/1823/1483 mm respectively, and the wheelbase is 2648 mm. The roof of the car adopts a streamlined design, and there is a small fin-shaped design above the roof.
Global trade barrier analysis-APP, download it now, new users will receive a novice gift pack.
2. The Focus 6 model adopts a 6-liter naturally aspirated engine from Ford products, with a maximum power of 107 horsepower and a peak torque of 145 Nm. Its power performance is excellent. It has good acceleration performance and economy in actual driving, which can meet the vast The driving needs of most consumers.
3. Four cylinders. According to Youjia, the 6L engine of the new Focus is already made in Chang'an Ford, code-named C6. This engine is a non-pressurized direct injection four-cylinder engine. It is a simplified version of the Ford 6LEcoboost supercharged direct injection engine, and the supercharger is removed.
4. Ford Focus is also equipped with 6LDragonTiVCT self-aspirated engine and 6LDragonThe GTDI turbocharged engine is matched with 6MT/6AT and 8AT gearboxes respectively. Focus is a car brand under Ford Motor Company in the United States, mainly producing family cars, SUVs, trucks and other models.
1. The engine used by the Fox 6 displacement model is the ti-vct engine. The engine of this model is made in Chang'an Ford. The code name is c6, which is a direct injection four-cylinder engine without supercharging effect.
2. Focus's 6Ti-VCT engine comes from Ford's 1995 Sigma engine. The engine is a double overhead camshaft (DOHC) in-line four-cylinder. The displacement is from 25 liters to 7 liters.
3. The new 6LTiVCT engine adopted by the new Focus is equipped with a dual variable door timing system. The power parameters are roughly at a maximum power of 92kw and a maximum torque of 152Nm, which is very close to the current 8L displacement of Chang'an Ford CAF483Q0 engine power output.But the fuel consumption is much lower than that of the 8L model.
4. Yes, the engine of the 17 Fox 6 is generally very good. It can reach more than 170 horsepower, which is completely sufficient in terms of power. Secondly, the biggest advantage of the naturally aspirated engine of 6 is that it is of good quality and stability. In addition, this engine is not picky about food, whether it is No. 92 gasoline or No. 95 gasoline.
In terms of body size, the length, width and height of the Ford Focus 2012 sedan are 4552mm/1823mm/1493mm, and the wheelbase is 2648mm. . The body length is 245mm higher than that of the previous two-box models, and the wheelbase is also increased by 52mm. Compared with models of the same class, its body size has obvious advantages.
In terms of appearance, the length, width and height of the 2012 new Fox sedan are 4530mm, 1823mm and 1468mm respectively. The wheelbase is 2619mm, the front suspension is 1550mm, and the rear suspension is 1577mm. The exterior design style of the whole vehicle is fashionable and dynamic. It adopts Ford's latest family-style front face design, which has a very high degree of recognition.
The front and rear wheelbases of the new Focus are 1553mm and 1544mm respectively, which is 18mm more than the 1535mm front wheelbase of the current model, and 11mm more than the rear wheelbase of 1531mm. Theoretically speaking, the lengthening of the new wheelbase means that the vehicle will be more stable when driving. This Goodyear Assurance Fuel Max Chinese used by Dingxin Fox.
Power configuration: The Focus sedan adopts Ford's most advanced powertrain, of which the 5L naturally aspirated engine has a performance comparable to that of a 0L self-aspirated engine, with a maximum horsepower of 118 horsepower and a peak torque of 146 Nm, and a 6-speed manual or 6-speed automatic transmission.
In terms of body size, the length, width and height of the new Focus are 4358/1823/1483 mm respectively, and the wheelbase is 2648 mm. The roof of the car adopts a streamlined design, and there is a small fin-shaped design above the roof.
Comparative industry trade benchmarks
author: 2024-12-23 23:09HS code-based broker fee negotiations
author: 2024-12-23 22:41HS code-based cargo insurance optimization
author: 2024-12-23 21:51How to integrate AI in trade data analysis
author: 2024-12-23 21:09Dynamic customs duty calculation
author: 2024-12-23 20:40How to evaluate supplier reliability
author: 2024-12-23 22:46Industry-focused market entry reports
author: 2024-12-23 22:08Advanced trade data analytics techniques
author: 2024-12-23 22:03Global trade data enrichment services
author: 2024-12-23 21:06Analytical tools for trade diversification
author: 2024-12-23 21:03268.47MB
Check344.44MB
Check874.89MB
Check374.61MB
Check772.83MB
Check843.23MB
Check647.92MB
Check893.43MB
Check727.19MB
Check835.18MB
Check447.51MB
Check479.78MB
Check138.61MB
Check528.42MB
Check932.73MB
Check275.39MB
Check588.85MB
Check194.36MB
Check696.86MB
Check999.99MB
Check362.88MB
Check347.66MB
Check311.66MB
Check836.94MB
Check767.18MB
Check172.58MB
Check983.12MB
Check359.61MB
Check578.58MB
Check547.77MB
Check924.85MB
Check233.44MB
Check426.65MB
Check478.18MB
Check363.18MB
Check821.88MB
CheckScan to install
Global trade barrier analysis to discover more
Netizen comments More
1642 Trade data integration with CRM
2024-12-23 22:54 recommend
1258 Rubber exports HS code classification
2024-12-23 22:33 recommend
285 Expert tips on customs data usage
2024-12-23 21:40 recommend
2295 Global trade shipping route optimization
2024-12-23 21:03 recommend
1526 Machine tools HS code classification
2024-12-23 20:52 recommend