1. Insufficient fuel supply. The return oil control valve in the pump cover oil channel is not closed tightly. At this time, the engine is not working stable. When it is serious, it will turn off with a slight load, and it is difficult to start. 2 There is an oil leak in the oil line, the air entering or the fuel filter is blocked, the oil is not smooth, and the engine is weak.
2. There are many reasons. The routine is the air filter, the nozzle, whether the oil has not been changed, and whether the battery has enough power. These are the most basic. Then it is to check the oil in the wave tank and whether the oil line is unobstructed. The most direct way is to add additives without disassembly. This head will not do much, and it is also relatively old.
3. Hello, this is the lack of power of the engine.The following points need to be checked: 1 The oil pressure of gasoline, the lack of oil pressure is generally caused by the false connection of the gasoline pump and its lines. 2 Check the spark plug and ignition coil. If the ignition energy is insufficient, the power will be insufficient.
1. The brand is a Mitsubishi engine. The 8L version of Heyue RS is equipped with Mitsubishi's 4G93D engine. This engine is Mitsubishi's old engine, which is widely used in many independent brand models.
2. Heyue RS5L uses HFC4GB3C engine, and Heyue RS8L uses 4G93D engine, both of which are Mitsubishi's technology, which are quite mature. The poster can search for a detailed understanding of these two engine models on Baidu.
3. Hello, this car friend, Jianghuai Heyue RS uses the engine produced by "Dong'an Mitsubishi", which is based on the introduction of Mitsubishi technology.
4. Equipped with the first-generation Mitsubishi engine. It is equipped with a 5-liter naturally aspirated engine and an 8-liter naturally aspirated engine. Among them, the maximum horsepower of the 5-liter version of Heyue is 113 horsepower, the maximum power is 83kw, and the maximum torque is 146N*m.
1. As for whether the idling motors of the 4G93D and 4G93 engines are the same, it depends on the specific model and year of production. There may be some differences between the two engines, so it is recommended to consult a car manufacturer or a professional mechanic for accurate information.
2. The idle speed of the engine is generally 700 to 900 rpm. Each model is different, and the idle speed is different. If it is an electronic throttle valve, the idle speed cannot be adjusted. Pull the wire throttle valve can loosen the adjustment screw at the throttle valve spring, as long as the engine does not turn off after the refueling door. Fire is fine.
3. Jingyi uses a 4G93D4 all-aluminum alloy engine with double overhead camshafts and 4 valves per cylinder. The maximum power of 103kW/6500rpm and the peak torque of 168N.m/5000rpm can be provided in technical data.
Global trade intelligence forums-APP, download it now, new users will receive a novice gift pack.
1. Insufficient fuel supply. The return oil control valve in the pump cover oil channel is not closed tightly. At this time, the engine is not working stable. When it is serious, it will turn off with a slight load, and it is difficult to start. 2 There is an oil leak in the oil line, the air entering or the fuel filter is blocked, the oil is not smooth, and the engine is weak.
2. There are many reasons. The routine is the air filter, the nozzle, whether the oil has not been changed, and whether the battery has enough power. These are the most basic. Then it is to check the oil in the wave tank and whether the oil line is unobstructed. The most direct way is to add additives without disassembly. This head will not do much, and it is also relatively old.
3. Hello, this is the lack of power of the engine.The following points need to be checked: 1 The oil pressure of gasoline, the lack of oil pressure is generally caused by the false connection of the gasoline pump and its lines. 2 Check the spark plug and ignition coil. If the ignition energy is insufficient, the power will be insufficient.
1. The brand is a Mitsubishi engine. The 8L version of Heyue RS is equipped with Mitsubishi's 4G93D engine. This engine is Mitsubishi's old engine, which is widely used in many independent brand models.
2. Heyue RS5L uses HFC4GB3C engine, and Heyue RS8L uses 4G93D engine, both of which are Mitsubishi's technology, which are quite mature. The poster can search for a detailed understanding of these two engine models on Baidu.
3. Hello, this car friend, Jianghuai Heyue RS uses the engine produced by "Dong'an Mitsubishi", which is based on the introduction of Mitsubishi technology.
4. Equipped with the first-generation Mitsubishi engine. It is equipped with a 5-liter naturally aspirated engine and an 8-liter naturally aspirated engine. Among them, the maximum horsepower of the 5-liter version of Heyue is 113 horsepower, the maximum power is 83kw, and the maximum torque is 146N*m.
1. As for whether the idling motors of the 4G93D and 4G93 engines are the same, it depends on the specific model and year of production. There may be some differences between the two engines, so it is recommended to consult a car manufacturer or a professional mechanic for accurate information.
2. The idle speed of the engine is generally 700 to 900 rpm. Each model is different, and the idle speed is different. If it is an electronic throttle valve, the idle speed cannot be adjusted. Pull the wire throttle valve can loosen the adjustment screw at the throttle valve spring, as long as the engine does not turn off after the refueling door. Fire is fine.
3. Jingyi uses a 4G93D4 all-aluminum alloy engine with double overhead camshafts and 4 valves per cylinder. The maximum power of 103kW/6500rpm and the peak torque of 168N.m/5000rpm can be provided in technical data.
HS code-driven import quality checks
author: 2024-12-24 01:45Trade data for food and beverage industry
author: 2024-12-24 00:55Bio-based plastics HS code classification
author: 2024-12-24 00:30Automated trade documentation routing
author: 2024-12-24 00:28Trade intelligence for industrial equipment
author: 2024-12-24 00:08Advanced trade data analytics techniques
author: 2024-12-24 01:39Apparel HS code mapping for global exports
author: 2024-12-24 01:02HS code monitoring tools for exporters
author: 2024-12-24 00:49HS code alignment with import quotas
author: 2024-12-24 00:31Top trade data plugins for analytics
author: 2024-12-23 23:58466.57MB
Check612.46MB
Check388.54MB
Check919.68MB
Check754.19MB
Check971.98MB
Check612.74MB
Check995.34MB
Check259.21MB
Check165.57MB
Check623.82MB
Check248.45MB
Check692.98MB
Check693.76MB
Check196.57MB
Check777.79MB
Check462.82MB
Check119.82MB
Check997.58MB
Check111.58MB
Check895.78MB
Check352.82MB
Check439.38MB
Check256.41MB
Check986.53MB
Check854.94MB
Check982.24MB
Check922.73MB
Check642.83MB
Check167.56MB
Check444.79MB
Check775.73MB
Check554.56MB
Check691.38MB
Check132.26MB
Check871.43MB
CheckScan to install
Global trade intelligence forums to discover more
Netizen comments More
2089 Pharmaceutical trade analytics platform
2024-12-24 01:22 recommend
2791 HS code alignment with sustainability targets
2024-12-24 01:17 recommend
906 Supplier relationship management with trade data
2024-12-24 01:10 recommend
604 Global trade metadata enrichment
2024-12-24 00:59 recommend
2199 Mining equipment HS code references
2024-12-24 00:01 recommend