The manufacturer is not exactly the same: ACTECO-SQRD4G15 engine is jointly developed with Austrian AVL, and Chery has independent intellectual property rights. The SQRE4G15 engine is independently developed by Chery.
SQRD4G15 is an engine under Chery. Mitsubishi and Chery jointly developed an engine. The letter S represents Mitsubishi, the letter QR represents Chery, the letter D represents the engine model, 4G represents four-cylinder, and 15 represents 5L displacement.The maximum power is 80kw and the maximum torque is 140nm.
Features of Chery Kaiyi C3 The engine used by Kaiyi C3 is Chery Automobile Group's SQRD4G15, a 15L naturally aspirated engine with a maximum torque of 140Nm. It adopts a single overhead camshaft structure with an in-line four-cylinder design, without the support of complex turbochargers. It has precise in-cylinder direct injection technology, and its biggest feature is its excellence.
The Kaiyi c3r does not use the actecosqrd4g15 engine. Chery's relatively mature technology has been used on Chery E3 and Arizer 3. The reliability is not bad. The fuel-saving performance is average, and the overall maintenance and repair costs are relatively low. It is a relatively practical type of Kaiyi C3R. It is a small car produced by Kaiyi Automobile. Kaiyi Automobile officially announced C3.
The 5-displacement engine of Chery E3 is SQRD4G15, which belongs to the improved version of SQR477F and belongs to Chery's first-generation engine. The compression ratio is 5, the maximum power is 80KW, the torque is 140NM, and the emission meets the requirements of Beijing V.
1. In the endurance test, the engine and transmission did not have quality problems. However, the overall power of the vehicle is poor, and the noise is more obvious.
2. There are many reasons for the decline in power of the Geely English sc715 model. The lack of cylinder in the car engine, the poor quality of the fuel oil added to the car, and too much carbon accumulation in the engine of the car may all cause this problem. It is recommended to find a regular auto repair factory for maintenance.
3. This situation is usually caused by the intake system and fuel injection control system, or it may be due to poor idle speed caused by engine mechanical failure.
4. G15M is a belt transmission, which needs to be replaced, while 4A91 is a timing chain transmission, which does not need to be replaced, but the disadvantage is that the transmission is loud. 4G15M is two ignition coils, each of which is responsible for the work of two cylinder blocks, while 4A91 is four independent ignition coils.
1. Yes. According to the query car owner's guide website, the exact model of the 4g15 engine is 4g15m, which is Mitsubishi's exclusive technology mivic technology, and 4g15m is Mitsubishi engine.
2. The Cf4g15t engine is from Mitsubishi. For example, Cheetah is equipped with this engine, and its performance is quite good. The maximum power of this engine is 105 kilowatts, and the peak torque is 210 Nm. 4G15S is improved on the basis of 4G18, and many parts of the two engines are universal.
3. Since its birth, the 4G15 series engine has the characteristics of high power and high torque, and its high quality and high performance characteristics have been recognized by many brands. Up to now, more than 3 million engines have been launched into the market, and the super-large market holdings also show the superior performance of Mitsubishi engines from the side.
CF4G15T.The 5T engine has good power performance and strong explosive power. The CFA7161A model is equipped with a 5T turbocharged engine model CF4G15T, with a maximum power of 150 horsepower/5500rpm.
The cf4g15t engine is Mitsubishi. For example, the Cheetah is equipped with this engine, and its performance is quite good. The maximum power of this engine is 105 kilowatts, and the peak torque is 210 Nm. 4G15S is improved on the basis of 4G18, and many accessories of the two engines are universal.
The two engines are relatively similar, while the latter is more outstanding in terms of power and lower fuel consumption.
Regarding the motor vehicle Cheetah cs9, the engine model it uses should be cF4g15, this model.
Mitsubishi's 4G15T adopts Mitsubishi's original MIVEC technology. Under the control of the ECU, it automatically adjusts the phase angle of the intake cam within a certain range according to the different engine load, which further improves the inflation efficiency of the engine, thus improving the performance of the engine.
1. Good quality: GW4G15M engine is light in weight, powerful, low fuel consumption, low noise, low emissions, compact in structure, and adopts an all-aluminum alloy body, which is a typical double-peak output.
2. OK. Lightweight: The gw4g15m engine adopts an all-aluminum alloy body, which is 20% lighter than the traditional cast iron cylinder block. Lightweight design helps to reduce the overall weight of the vehicle and improve fuel economy and handling performance. Strong power: The engine reaches the maximum torque at 4200rpm, which has the characteristics of double peak output.
3. OK. Light weight: The GW4G15M engine adopts an all-aluminum alloy body, which has a lighter weight than the traditional cast iron cylinder block.This design reduces the burden of the whole engine during installation and suspension, and improves the fuel economy and handling performance of the vehicle.
Quality. The Haval gw4g15m engine adopts more durable materials, which can better ensure the long-term use effect and good quality of the engine. In terms of performance.
Good design: The Haval gw4g15m engine is made of all-aluminum alloy material, which is about 20% lighter than the traditional cast iron cylinder block. The lightweight design can reduce the quality of the whole vehicle and improve fuel economy and handling performance.
The engine is good. Power performance: The maximum power of the gw4g15m engine is113 horsepower, the maximum torque is 141 Nm, and the power performance is stable to meet the daily driving needs. Fuel economy: The engine adopts advanced combustion technology and high-performance parts, which improves fuel economy.
Good quality: GW4G15M engine is lightweight, powerful, low fuel consumption, low noise, low emissions, compact structure, and adopts an all-aluminum alloy body, which is a typical double-peak output.
Good. Lightweight: The gw4g15m engine adopts an all-aluminum alloy body, which is 20% lighter than the traditional cast iron cylinder block. Lightweight design helps to reduce the overall weight of the vehicle and improve fuel economy and handling performance.
HS code-based compliance in bilateral trades-APP, download it now, new users will receive a novice gift pack.
The manufacturer is not exactly the same: ACTECO-SQRD4G15 engine is jointly developed with Austrian AVL, and Chery has independent intellectual property rights. The SQRE4G15 engine is independently developed by Chery.
SQRD4G15 is an engine under Chery. Mitsubishi and Chery jointly developed an engine. The letter S represents Mitsubishi, the letter QR represents Chery, the letter D represents the engine model, 4G represents four-cylinder, and 15 represents 5L displacement.The maximum power is 80kw and the maximum torque is 140nm.
Features of Chery Kaiyi C3 The engine used by Kaiyi C3 is Chery Automobile Group's SQRD4G15, a 15L naturally aspirated engine with a maximum torque of 140Nm. It adopts a single overhead camshaft structure with an in-line four-cylinder design, without the support of complex turbochargers. It has precise in-cylinder direct injection technology, and its biggest feature is its excellence.
The Kaiyi c3r does not use the actecosqrd4g15 engine. Chery's relatively mature technology has been used on Chery E3 and Arizer 3. The reliability is not bad. The fuel-saving performance is average, and the overall maintenance and repair costs are relatively low. It is a relatively practical type of Kaiyi C3R. It is a small car produced by Kaiyi Automobile. Kaiyi Automobile officially announced C3.
The 5-displacement engine of Chery E3 is SQRD4G15, which belongs to the improved version of SQR477F and belongs to Chery's first-generation engine. The compression ratio is 5, the maximum power is 80KW, the torque is 140NM, and the emission meets the requirements of Beijing V.
1. In the endurance test, the engine and transmission did not have quality problems. However, the overall power of the vehicle is poor, and the noise is more obvious.
2. There are many reasons for the decline in power of the Geely English sc715 model. The lack of cylinder in the car engine, the poor quality of the fuel oil added to the car, and too much carbon accumulation in the engine of the car may all cause this problem. It is recommended to find a regular auto repair factory for maintenance.
3. This situation is usually caused by the intake system and fuel injection control system, or it may be due to poor idle speed caused by engine mechanical failure.
4. G15M is a belt transmission, which needs to be replaced, while 4A91 is a timing chain transmission, which does not need to be replaced, but the disadvantage is that the transmission is loud. 4G15M is two ignition coils, each of which is responsible for the work of two cylinder blocks, while 4A91 is four independent ignition coils.
1. Yes. According to the query car owner's guide website, the exact model of the 4g15 engine is 4g15m, which is Mitsubishi's exclusive technology mivic technology, and 4g15m is Mitsubishi engine.
2. The Cf4g15t engine is from Mitsubishi. For example, Cheetah is equipped with this engine, and its performance is quite good. The maximum power of this engine is 105 kilowatts, and the peak torque is 210 Nm. 4G15S is improved on the basis of 4G18, and many parts of the two engines are universal.
3. Since its birth, the 4G15 series engine has the characteristics of high power and high torque, and its high quality and high performance characteristics have been recognized by many brands. Up to now, more than 3 million engines have been launched into the market, and the super-large market holdings also show the superior performance of Mitsubishi engines from the side.
CF4G15T.The 5T engine has good power performance and strong explosive power. The CFA7161A model is equipped with a 5T turbocharged engine model CF4G15T, with a maximum power of 150 horsepower/5500rpm.
The cf4g15t engine is Mitsubishi. For example, the Cheetah is equipped with this engine, and its performance is quite good. The maximum power of this engine is 105 kilowatts, and the peak torque is 210 Nm. 4G15S is improved on the basis of 4G18, and many accessories of the two engines are universal.
The two engines are relatively similar, while the latter is more outstanding in terms of power and lower fuel consumption.
Regarding the motor vehicle Cheetah cs9, the engine model it uses should be cF4g15, this model.
Mitsubishi's 4G15T adopts Mitsubishi's original MIVEC technology. Under the control of the ECU, it automatically adjusts the phase angle of the intake cam within a certain range according to the different engine load, which further improves the inflation efficiency of the engine, thus improving the performance of the engine.
1. Good quality: GW4G15M engine is light in weight, powerful, low fuel consumption, low noise, low emissions, compact in structure, and adopts an all-aluminum alloy body, which is a typical double-peak output.
2. OK. Lightweight: The gw4g15m engine adopts an all-aluminum alloy body, which is 20% lighter than the traditional cast iron cylinder block. Lightweight design helps to reduce the overall weight of the vehicle and improve fuel economy and handling performance. Strong power: The engine reaches the maximum torque at 4200rpm, which has the characteristics of double peak output.
3. OK. Light weight: The GW4G15M engine adopts an all-aluminum alloy body, which has a lighter weight than the traditional cast iron cylinder block.This design reduces the burden of the whole engine during installation and suspension, and improves the fuel economy and handling performance of the vehicle.
Quality. The Haval gw4g15m engine adopts more durable materials, which can better ensure the long-term use effect and good quality of the engine. In terms of performance.
Good design: The Haval gw4g15m engine is made of all-aluminum alloy material, which is about 20% lighter than the traditional cast iron cylinder block. The lightweight design can reduce the quality of the whole vehicle and improve fuel economy and handling performance.
The engine is good. Power performance: The maximum power of the gw4g15m engine is113 horsepower, the maximum torque is 141 Nm, and the power performance is stable to meet the daily driving needs. Fuel economy: The engine adopts advanced combustion technology and high-performance parts, which improves fuel economy.
Good quality: GW4G15M engine is lightweight, powerful, low fuel consumption, low noise, low emissions, compact structure, and adopts an all-aluminum alloy body, which is a typical double-peak output.
Good. Lightweight: The gw4g15m engine adopts an all-aluminum alloy body, which is 20% lighter than the traditional cast iron cylinder block. Lightweight design helps to reduce the overall weight of the vehicle and improve fuel economy and handling performance.
International trade KPI tracking
author: 2024-12-23 20:54HS code-driven market penetration analysis
author: 2024-12-23 20:42High-value electronics HS code checks
author: 2024-12-23 20:10HS code tagging in ERP solutions
author: 2024-12-23 21:34Dairy imports HS code references
author: 2024-12-23 21:33Supplier relationship management with trade data
author: 2024-12-23 21:03Textile exports HS code breakdown
author: 2024-12-23 20:31173.81MB
Check256.22MB
Check861.72MB
Check719.53MB
Check646.13MB
Check888.94MB
Check158.66MB
Check338.68MB
Check143.62MB
Check497.12MB
Check867.99MB
Check559.68MB
Check853.73MB
Check651.95MB
Check584.47MB
Check647.88MB
Check322.99MB
Check363.69MB
Check739.92MB
Check375.61MB
Check882.63MB
Check711.16MB
Check522.75MB
Check738.49MB
Check664.67MB
Check215.72MB
Check783.23MB
Check425.88MB
Check756.56MB
Check736.32MB
Check875.53MB
Check159.28MB
Check289.54MB
Check474.74MB
Check239.32MB
Check587.69MB
CheckScan to install
HS code-based compliance in bilateral trades to discover more
Netizen comments More
1008 supply chain transparency
2024-12-23 22:25 recommend
1973 Import risk analysis metrics
2024-12-23 22:12 recommend
2122 HS code analytics for import quotas
2024-12-23 21:54 recommend
2879 Exotic wood imports HS code references
2024-12-23 21:39 recommend
1920 Country-specific HS code exemptions
2024-12-23 21:10 recommend