Canada shipment tracking services

List of contents of this article:

• 1,Canada shipment tracking services No after selecting the USB disk to start with the USB disk installation system'Enter the PE interface
• 2, Reinstall Installation system tutorial
• 3, desktop installation system How to enter pe
• 4, Use pe to install the system on the computer, and restart it like this in the future. What's going on and how should it be solved? _Baidu...
• 5, How to use a usb disk to make a Pe boot disk and install the system
• 6, How to install the system with pe

Unable to enter the PE interface after selecting the USB disk to install the system with the USB disk

1. UEFI and Legacy mode settings are incorrect: In the BIOS settings, make sure that your notebook boot mode is set to either UEFI or Legacy mode, depending on the boot method of your PE system and USB flash drive.If the setting is wrong, you need to change the corresponding settings.

2. There are relatively few cases where the USB flash drive fails to start winpe to obtain hard disk information, which is mainly caused by the incompatible driver of the mode selected by the hard disk and the current PE system. At this time, you can try to use other winpe to modify the system. If it doesn't work, you can also enter the BIOS to change the hard disk mode.

3. This situation may be caused by the following reasons: USB disk production problem: make sure that your USB disk has correctly made the PE system, and you can try to remake it. Use professional production tools, such as micro PE toolbox, EasyBCD, etc., and operate correctly according to the tutorial.

Reinstall System tutorial

1. Most computer startup shortcuts are F1F11 or ESC. This article will introduce the detailed steps of reinstalling the computer system to help you easily complete the reinstallation.

2. You can reinstall the system with a USB flash drive. The following are the specific steps. Make a USB boot disk with [u boot USB boot disk production tool] to make a u boot disk boot disk. Then insert the USB boot disk into the USB interface of the computer, press the boot shortcut key to enter the u boot main menu interface, select the run win8pe menu and press the Enter key to enter.

3. It can only be reinstalled once with a USB flash drive, and the installation process of the system cannot be interrupted. After making a boot disk with a USB disk on another computer (u boot USB disk boot disk making tool), download the system image to the USB disk, and then take it to install it on this computer.

4. Reinstalling the system can be solved. The operation steps of system USB disk production and reinstalling the system are to make a boot USB disk and go to the physical store to buy a 4-8G USB disk (you can ask the boss to help make it into a system USB disk to omit the following steps). Search and download the installer's USB disk on the Internet to start the PE producer. Insert the USB flash drive into the computer to run this software to make a boot USB flash drive.

How to enter pe in desktop installation system

1,Dell desktops can enter the boot menu before entering the operating system by pressing the F12 or ESC key, and then selecting to boot from USB or other startup devices to enter the PE (Windows Preinstallation Environment) environment.

2. The steps for win7 to enter the pe system are as follows: 1 First, download and install the cabbage pe boot disk making tool, insert the USB disk, identify the USB disk and click one-click to make the USB boot disk, pop up the prompt box, and click OK directly. 2 After waiting for a while, these prompts will pop up. Box, click OK, and the pe startup disk will be completed.

3. PE, that is, the system USB flash drive, when reinstalling the system, you need to enter PE to start the reinstallation. Generally, press F12 or Del to enter the computer when it is turned on.However, Dell computers cannot enter PE by default. For how to enter the PE of Dell desktop, please see the detailed tutorial.

4. First, turn on the computer and keep pressing F12 on the keyboard (different computer brands and models may have different keys), and you will enter the following interface. Move the cursor to the USB Storage Device by pressing the up and down keys in the keyboard and press Enter, and the system will boot from the USB flash drive. Choose to run the PE system.

5. First, search [Xiaobai System Official Website] to download Xiaobai software, prepare a blank USB flash drive, and make a boot disk. Just start the production directly according to the guide, and exit the security software when making to avoid intercepting the production failure. After the production is completed, plug in the USB flash drive and restart the computer.

6. First, insert the USB flash drive into the computer, and then turn it on. When the dell screen appears, press F12 or end wildly. The method of each brand of computer is different, and you need to search for this by yourself. Then select up and down to enter the startup order, select usb storage Dev ice, and then enter.

Use pe to install the system on the computer, and restart it like this in the future. What's going on and how should it be solved? _Baidu...

1. After installation, the installed USB flash drive should be removed. Lao Maotao PE failed to reinstall the system. The reasons are: there is a problem with the Ghost image, the installation process is wrong, the method is wrong, the installation system is incompatible with the computer, etc.There is a problem with the original hard disk and it can't be installed.

2. Another possibility is that the computer system is not successfully installed or the driver of the system is missing, resulting in the inability to enter the installed operating system. In this case, you can only enter the system by re-downloading the mirror image of an operating system online, reinstalling it, and then restarting it.

3. This situation is not a big deal. It may be that the interface opened by the PE system during the installation process of your system. The original system has been damaged and the system needs to be reinstalled. Before installing the system, you must format the C disk and then reinstall the system.

4. Is it a little flashing? This is a boot program error. Use the partition tool to update the MBR. It may also be that it is not installed in C. You can see it when you enter PE.

5. Solution: Format the c disk before installing the system before installing the system.

How to use a USB disk to make a Pe boot disk and install a system

1. Use the cabbage USB disk boot disk making tool to make a USB disk boot disk, and download the genuine system mirror image or pure version mirror image, and download the suffix ISO Copy the mirror file to the root directory of the USB flash drive. Press F2 to enter the BIOS settings when the BIOS settings are turned on.

2. Enter the official website to download the U startup installation package; (2) Open the installation package, select the installation location on the D disk, and click to understand the installation; (3) After installation, insert a USB disk of about 8G, select the USB disk, and click to start production (others are fine to keep the default); (4) Select Yes, USB disk open The dynamic disc was successfully produced.

3. Insert the USB flash drive into the computer, restart and press Del or F2 or F1 or F10 or esc and other keys to enter the BIOS interface. Under the boot item selection menu interface, select the usb item and press the return key to enter the USB disk reinstallation page. Reinstalling the system can solve some problems caused by viruses and various system problems for unknown reasons.

4. There are many production tools for the USB disk boot disk. Just choose one at will. For the production process of the USB disk boot disk, you can refer to the software instructions. It's very simple. The USB disk boot disk is just a boot disk and does not have any operating system. Therefore, we need to download the mirror file by ourselves and then enter CM. OS sets the boot order and changes it to USB flash drive startup.

How to install the system with pe

1. After BIOS setting and pressing F10 to save successfully, you will enter the interface in Figure 1. Here you can choose the PE system to run, and Figure 1 selects to run the USB disk system master win8PE x86 light version.

2. Method 1: Prepare a USB flash drive. At least 2G (win7 at least 4G) regardless of the model, but at least ensure that the computer can be recognized when starting. Prepare the PE system. Prepare the system.

3. Download the latest general pe toolbox to make the USB disk into a USB disk boot disk, and then copy the downloaded windows10 image file to the USB disk (the size of the windows10 image file is 4g, so the USB disk made into a USB disk boot disk needs to be 8g to Above.