How to track multiple supply chain tiers

List of Contents of this article:

• 1,How to track multiple supply chain tiers Is it difficult to learn car engines?
• 2、What is the function of the fuel pump pressure sensor
• 6 、 Where can I learn car engine maintenance technology?

Is it difficult to learn car engines?

It is still quite difficult to learn automobile engine maintenance, and there are more tools required. Therefore, it takes a long time to learn engine maintenance, and there are also many problems for this analysis.

Learning engine maintenance technology is relatively easy to learn. The main thing is to learn the mechanical part first, and this part should be practiced more. The second is the disassembly and installation part. The electronic control part should listen to the teacher's explanation for corresponding detection and measurement.

It is not too difficult to learn automobile engine maintenance courses, because now the teaching mode of the school is integrated with theory and practice. As long as you are willing to learn, you can learn.

Auto repair technology is not difficult to learn, but choosing the right place is very important. If you want to be an apprentice, it will take 3 to 5 years to become a middle worker. If you want to be a carpenter, you should not only have a good master, but also take a long time to study. There are too many models in contact, and it is difficult to master.

Lesson plan on how the car works

1. The choice of lubricating oil should also meet the working needs of the engine. If the viscosity of the engine lubricating oil is low, the pressure of the lubricating oil is low and cannot form an oil film, causing boundary friction or dry friction; if the viscosity of the lubricating oil is too high, the fluidity is poor, which is not conducive to cold. The car starts, and at the same time, the lubricating oil reaches the lubrication part through the oil filter for a long time, which increases the start-up wear.

2. Exploration Pavilion The structure of the car The structure of the car is roughly composed of the following parts: power, transmission, suspension, control, safety, body, etc.

3. Chassis: The chassis is used to support and install the automobile engine and its parts and assembly, form the overall shape of the automobile, and receive the power of the engine, so that the automobile can move and ensure normal driving.The chassis consists of four parts: transmission system, drive system, steering system and brake system.

4. Small class common sense to understand cars Small class common sense to understand cars Small class science activity lesson plan to understand car structure Activity goals Recognize several common cars Understand the basic structure and use of sprinkler trucks. Perceive the special functions of the sprinkler truck through observation and comparison.

5. The following is the car lesson plan on the middle class road in kindergarten that I have collected for you. Welcome to share. Kindergarten middle class car on the road lesson plan 1 Activity goal: like various vehicles, master the names, appearance and uses of common cars, and feel the relationship between cars and people's lives. Learn to classify according to different uses of cars.

6. Interesting car lesson plan Chapter 1 [Activity Goal] Experience the fun of bold imagination and designing interesting and fast vehicles.Cultivate children's traffic safety awareness. [Activity Preparation] "Car Kingdom" wall decoration with various vehicle pictures. Courseware: Cartoon "Interesting Car".

What is engine cleaning teaching?

1. Before cleaning the engine compartment, please make sure that the vehicle has been turned off for more than three hours, otherwise there is a risk of burns. It is not recommended to rinse the cabin directly with running water. First, use a high-pressure air gun to clean the dust and impurities in the cabin.

2. Cleaning method of automobile engine The method is divided into engine external cleaning agent cleaning, high-pressure water gun cleaning, high-pressure air cleaning, etc. When cleaning the engine or engine compartment, the engine should be turned off first so that all electrical appliances do not work.

3. How to clean the engine fuel system?Because the fuel distribution system of the car is very precise, it cannot be disassembled casually. When cleaning the engine fuel system, the engine disassembly-free cleaning agent should be used, because the disassembly-free cleaning agent does not need to disassemble the fuel system. On the one hand, it can play the role of thoroughly cleaning the fuel system, and on the other hand, it is conducive to protecting the fuel system of the engine.

4. Disassemble the oil span and cylinder head to clean particularly dirty engines should be disassembled from the oil span and cylinder head for cleaning, or use cleaning oil or detergent. Many oil manufacturers produce cleaning oil and detergents, all of which contain detergents with strong cleaning ability and some anti-wear agents.

Automobile engine maintenance technology?

Semi-synthetic oil: The replacement cycle of semi-synthetic oil is generally about 8,000-10000 kilometers, and the price and performance are moderate. Mineral oil: This type of oil generally needs to be replaced at about 5,000 kilometers. Try to choose multi-stage oil. Multi-stage oil has a good protective effect on the engine due to its saving, long life and high efficiency.

It is relatively easy to learn engine maintenance technology, mainly toLearn the mechanical part, this part should be practiced more, the second is the disassembly and installation, the electronic control part, the electronic control part should listen to the teacher's explanation for corresponding detection and measurement.

If there is a lot of carbon, you should go to the repair shop to remove the carbon. 5. Replace the car's "three filters" on time. Three filters refer to air filters, oil filters and gasoline filters. The third filter plays a role in filtering air, oil and gasoline on the car engine, thus playing a protective role on the engine and improving the efficiency of the engine.

What is the function of the fuel pump pressure sensor

The function of the fuel pressure sensor is to control the fuel pressure in the oil line, maintain the constant oil supply pressure of the injector, and send the excess fuel back to the fuel tank.

The function of the fuel pressure sensor is to control the fuel pressure in the oil line, maintain a constant oil supply pressure of the fuel injector, and send the excess fuel back to the fuel tank. The fuel pressure sensor is composed of a printed circuit board, sensor assembly, gasket and shell, etc. There is a pressure chamber inside, and there is a diaphragm with an overflow valve in the cavity.

The function of the fuel pressure sensor is to convert the pressure of the oil into an electrical signal and transmit it to the display instrument or signal acquisition device.

The fuel pressure sensor, also known as the fuel pressure regulator, is used to adjust the fuel pressure in the oil line, keep the fuel supply pressure of the injector constant, and send excess fuel back to the car's fuel tank. There is a pressure chamber in the fuel pressure regulator, a diaphragm with an overflow valve in the chamber, a vacuum chamber in the diaphragm, and a spring in the chamber.

The functions of nine types of automobile pressure sensors are as follows: high and low pressure sensors for car air conditioners measure the pressure of condenser in the air conditioning system in the car; brake pressure sensors measure brake hydraulic or air pressure pressure.

, and air pressure adjustment sensor, etc., used for the whole vehicle system. Next, let's analyze the functions of these pressure sensors in detail. Oil pressure sensor Oil pressure sensor is also known as oil pressure switch and oil sensor plug.

Where can I learn car engine maintenance technology?

If you want to learn auto repair, you can go to professional auto repair vocational schools, relevant auto repair companies and other places. The details are as follows: professional auto repair vocational school.

The better car repair schools are as follows: Northern Auto Repair College.Wantong Auto Repair. Shandong Lanxiang Institute of Automotive Engineering. Blue Sky Technical School. Hangzhou Automobile Advanced Technical School. Shanghai Bosch Automobile Vocational and Technical Training School. Jiangsu Automobile Technician College. Advanced Technical School of Dongfeng Automobile Company.

Hello, if you want to learn the advice of automobile engine maintenance, you can go to a professional automobile school for systematic study. The operation of professional schools is standardized, with advanced practical training equipment, teachers hand-to-hand teaching, learning technology while also providing academic services, school-enterprise cooperation, employment is guaranteed.

For junior high school graduates, they can choose to go to secondary vocational schools or technical schools to study professional courses related to automobile maintenance technology. These schools generally provide courses on automobile engines, electrical systems, chassis, braking systems, etc.

Set up courses guided by the professional needs of the automobile maintenance service market to ensure that students firmly master the professional knowledge and basic skills of automobile engine construction and maintenance, automobile chassis structure and maintenance. Practical training and high-tech operation.